8-Chemie OTTOCOLL® P 86 PU adhesive for corner connections

OTTOCOLL® P 86 - The 1-component PU adhesive for corner connections.‎ Characteristics: 1-component a • dhesive based on polyurethane • Excellent adhesion on metals • Long skin-formation • Fills cavities optimally foaming slightly • Tensile strength after 7 days – approx.‎ 14.‎000 N (ift-test certificate) • Only for commercial users.‎ Please observe the material safety data sheet.‎ Fields of application: • General bonding in metal construction • Weathering resistant bonding of corner joints on metal windows, doors and façades as well as conservatories • Bonding of modified wood.‎ Standards and tests: • Tensile strength tested by the ift Rosenheim, Germany (institute for window techniques) • According to the requirements of DIN EN 204-D4 to weathering resistant bondings of wood and derived wood products • According to the requirements of DIN EN 14257 (WATT 91) to temperature-resistant bondings of wood and derived wood products • Expertise about the use of OTTOCOLL® P 86 translucent for bonding modified wood (Georg-August-University Göttingen, Germany) • Conform to LEED® IEQ-credits 4.‎1 (Indoor Environmental Quality) adhesives and sealants.‎ Additional useful information For bonding metals, the adhesive must not only have very fast curing but also excellent adhesive power on the metals used.‎ OTTOCOLL® P 86 being an adhesive based on PU is immediately ready to use and easy to handle.‎ Curing takes place via the chemical reaction with moisture, which is effected by spraying the surfaces to be bonded.‎ Since small quantities of carbon dioxide are formed while curing, OTTOCOLL® P 86 increases slightly in volume enabling hollow spaces to be filled up creating a tight anchoring of angle brackets and aluminium profiles.‎ The high bonding strength of corner joints of OTTOCOLL ® P 86 is confirmed by a test certificate issued by the Institute for Window Technology, Rosenheim, Germany (ift Rosenheim).‎