Baumit PuraColor - Акриловая декоративная краска

Baumit ProColor is an organically bound and processing finished paint for interior and exterior usage.‎ Baumit ProColor is extremely water-repellent, weather-resistant and permable.‎ Additionally, it is easy to clean and easy in processing.‎ Baumit PureColor is suitable for application to mineral and organically bound plasters as well as on fillers and concrete.‎ - Easy workability - Low water absorbtion - Largest range of colors Apply façade paint to the dry, clean substrate in two steps.‎ Make the prime coat by the diluted paint Baumit StyleColor with 10 – 15 % water.‎ After approx.‎ 12 hours, depending on climate conditions, apply the second coat of undiluted paint using a brush or roller.‎ If needed, the consistency of the paint can be adjusted using a small amount of water (max.‎ 5 %).‎ Brilliant effect coatings and finishes and intense colours - Allure Effect Deep and intense colours on thermally insulated façades are always a challenge.‎ Pura façade plasters and paints contain special cold pigments and are characterised by high colour strength.‎ For the successful realisation of dark-coloured façades.‎ Today, the trend is towards very intense shades.‎ However, the combination of architectural aesthetics, high demands on energy efficiency and durability has so far posed major challenges for building owners, designers and contractors.‎ Paints and finishes; dark and intense shades Contractors and designers, who wanted a strong colour combination for the façade, have so far been severely restricted in their choice of colours, mainly due to the fact that dark shades lose their intensity over time and become very hot in the sun.‎ The special formulation of Baumit PuraTop and Baumit PuraColor has led to great innovations today! It allows virtually unlimited colouring possibilities, including the most intense colours of the Baumit Life colour system.‎ These 94 intense colour shades form the basis of the Baumit Life colour system and provide more brilliance to the other shades.‎ The colour range is characterised by strong shades and gives every façade an exceptional and original character.‎ Incorporating the innovative Cool Pigments, they can be applied to large portions of a façade built with the thermal insulation system.‎ The Cool Pigments reflect a high percentage of sunlight, thus reducing the temperature of the façade and making it possible to apply dark colours to the entire surface of a thermal insulation system.‎ The pigment is added to coloured paints and finishes, which means that all 888 Life colours with a lightfastness coefficient of less than 20 can be applied to thermal insulation systems on large façade surfaces or plastered masonry.‎ While ordinary pigments absorb a large percentage of sunlight, cool pigments reflect the sun's rays, thus reducing the surface temperature.‎ This is why Baumit finishes and paints remain cool.‎ Further info from manufacturer on PuraColor Baumit