BOSSONG E-PLUS

BOSSONG BCR E-PLUS - Pure epoxy bi-component chemical anchor without styrene.‎ Product in 3:1 rario, available in 385 ml and 585 ml cartridges.‎ ETA (European Technical Assessment) qualified product for anchoring in concrete in accordance with EAD 330499-01-0601 and EAD 330087-01-0601 in accordance with the Construction Products Regulation 305/2011.‎ Service Life of 100 years compared to the standard value of 50 years.‎ Ideal for big works and infrastructure.‎ C2 seismic qualification for diameters from M12 to M24.‎ Ideal for structural reinforcement and seismic strengthening.‎ Maximum adhesion performance in non-cracked concrete optimized to achieve high design strength values on the steel side and concrete side.‎ Seismic qualification for post-installed rebar connections for all levels of seismicity for diameters from 12 mm to 32 mm.‎ Static and quasi-static qualification for threaded bars from M8 to M30 and for rebar from 8 to 32 mm.‎ Qualified for both drill and diamond core drilling holes.‎ Qualified installation with hollow drill bit in order to reduce exposure to dust and increase productivity by reducing cleaning times.‎ Fire resistance performance for post-installed rebar connections up to a maximum of R240.‎ Reduced edge distances and spacing to allow even the most difficult installations.‎ Maximum anchoring depth up to twenty times the nominal diameter of the threaded rod.‎ Embedding depth for post-installed rebar connections up to 2500 mm of perforation.‎ Increased fluidity to allow installation in deep holes and in low temperature situations.‎ Thixotropic product, qualified overhead application.‎ It does not pour.‎ Qualified performance for both dry and wet concrete and flooded hole.‎ The hardening reaction of the product also takes place in the presence of water.‎ Certified operating temperature are in the ranges: -40 ° C / + 40 ° C (long-term max T ° = 24 ° C), -40 ° C / + 55 ° C (long-term max T ° = 43 ° C) and -40 ° C / + 80 ° C (long-term max T ° = 50 ° C).‎ Reduced tightening times to increase productivity on site.‎ 24 months of expiry.‎ Application also possible in conditions of concrete temperature from 0 to 40 ° C.‎ Post-installed rebar connections allowed without increasing the setting depth in both cracked and non-cracked concrete.‎ The product, due to its high adhesion value and the ease of penetration into porosities and hollow areas, allows a secure fixing without expansion and therefore without tension in the base material during installation.‎ The resin and hardener are mixed only during extrusion by passing the product through the special mixer.‎ It does not require premixing.‎ It can also be used as a repair and filling compound.‎ Also suitable for fixing in solid masonry and wood and for consolidation work.‎ Environmental qualifications related to the emission of VOC LEED GOLD.‎ Further info from manufacturer on E-PLUS BOSSONG