CASALI DERMACEM FIBRO - Жидкая водонепроницаемая мембрана

Two-component, fibre-reinforced liquid waterproofing system based on cements and synthetic polymers.‎ DERMACEM FIBRO is a two-component, fibre-reinforced liquid waterproofing system based on cements and synthetic polymers in water dispersion.‎ The presence of high-modulus synthetic fibres in the mixture allows the product to be used without the need for reinforcement.‎ DERMACEM FIBRO forms a thin waterproof film that, once dried, is particularly elastic and therefore suitable for supporting settlement movements or those caused by thermal stresses in the substrate.‎ The product can be used for waterproofing small surfaces (≤ 30 m2) such as balconies, stairs, bathrooms, etc.‎ and for waterproofing tanks, swimming pools and foundations even in the presence of groundwater.‎ DERMACEM FIBRO is also suitable for protecting concrete constructions against the penetration of aggressive substances in the atmosphere, soil or sea water.‎ The use of Casaband SA or Acryfelt Band (elastic reinforcement bands) is highly recommended for the treatment of perimeter joints, expansion joints and all jointing areas between different materials or in connection with casting joints.‎ Advantages Pre-dosed components in special containers, ideal for mixing Maximum versatility of application: roller, brush, air-less Available in various colours or in a version that can be coloured during mixing Elastic: elongation 138% ± 10% Directly tilable (UNI EN 14891) Ideal for non-demolition restoration Wide range of finishes: walkable, carriageable, ultra-reflective The DERMACEM FIBRO version, fibre-reinforced, does not require reinforcement Fields of application - Bathrooms, showers, waterproofing of building wet areas - Surfaces ≤ 30 sqm: balconies, flashings, gutters, etc - Walls against ground: waterproofing of foundation walls even in the presence of ground water - Swimming pools and spa pools Average consumption 1.‎8 - 2 kg/m2 Colours Neutral (dark grey): can be coloured when mixing A+B with Dermacem pigment kit (available colours: cement grey, red and green) Note: Dermacem FIBRO can be produced already coloured as above for a minimum batch of 1 pallet (720 kg) Packaging A+B 2 plastic buckets (one for each component)