CASALI DERMACEM - Жидкая водонепроницаемая мембрана

DERMACEM is a two-component liquid waterproofing based on cements and synthetic polymers, colourable Dermacem is a two-component liquid waterproofing based on cements and synthetic polymers in water dispersion.‎ Once dried, it forms a thin waterproof film that is particularly elastic and therefore suitable to support settling movements or those caused by thermal stresses in the substrate.‎ DERMACEM is used for waterproofing walkable and non-walkable roofs, waterproofing surfaces to be paved with ceramic tiles (terraces, balconies, etc.‎), waterproofing foundations (even in the presence of groundwater) and any structure with a particularly complex geometry.‎ DERMACEM is also suitable for protecting concrete constructions from the penetration of aggressive substances in the atmosphere, soil or sea water.‎ If high mechanical stresses are to be expected, it is necessary to use a suitable reinforcement reinforcement (Acryfelt T1, Acryfelt Mesh, Acrymat 225 or Acrynet 75 depending on the type of substrate - consult the Reinforcement Selection Guide on page 6 or CASALI's Technical Assistance Centre - Synthetics Division) to be impregnated with the liquid product.‎ The use of Casaband SA or Acryfelt Band (elastic reinforcing bands) is strongly recommended for treating perimeter and expansion joints and all connection areas between different materials or in the case of casting joints.‎ Advantages Pre-dosed components in special containers, ideal for mixing Maximum laying versatility: roller, brush, air-less Available in various colours or in a version that can be coloured during mixing Elastic elongation 138% ± 10% Directly tilable (UNI EN 14891) Ideal for non-demolishing repairs Wide range of finishes: walkable, driveable, ultra-reflective Fields of application - Walkable flat roofs flat roofs, solariums, terraces - Roofs with complex geometry - Directly paved roofs - Renovation of existing roofs:non-demolishing renovation of old bituminous coverings and already paved surfaces - Wooden roofs - Sheet metal roofs - Driveway surfaces Average consumption 2 - 2.‎5 kg/m2 Colours Neutral (dark grey): can be coloured when mixing A+B with Dermacem pigment kit (available colours: cement grey, red and green).‎ Note: Dermacem can be produced already coloured as above for a minimum batch of 1 pallet (720 kg) Packaging A+B 2 plastic buckets (one for each component)