IMPERTEK

ERMETIC DRAIN CONNECTORS IN EPDM are used to connect EPDM waterproof roofing felts to rain water drains.‎ The slightly conical shape enables fast and simple installation in rain water drains.‎ The drain connector has a smooth flange to improve adhesion to the EPDM membranes and has two rings on the shank which act as a drain-trap between the connector and the rain water drain.‎ The resilience of the material used in its construction guarantees a long term seal.‎ The corner fittings have been designed to overcome the problem connecting the waterproof roofing felts with rain water drains placed close to walls.‎They have a smooth flange to improve adhesion of the EPDM roofing felt; they are available in two versions either with a 65x100 mm rectangular section or with a 100x100 mm square section.‎ The shank is 425 mm long and is capable of crossing walls of up to 40 cm.‎ The resilient material that it is made of guarantees a long term seal.‎They have a square or rectangular section for systematic water drainage.‎ The flange is slightly inclined to the shank to aid a slanted installation of the connector.‎The corner fitting can be installed in both horizontal and vertical drains.‎ Further info from manufacturer on Accessory for roof IMPERTEK