Nexus/3GU

Nexus/3G is a device for connectivity on third generation 3G networks.‎ The NEXUS/3GU model is designed to be installed inside the metal containers of the control units.‎ With Nexus, the control panels send automatic or customizable SMS messages for each event, and the control panels can also receive commands sent via SMS.‎ So you can enable or disable scenarios and outputs, request the status of the device and much more.‎ Nexus/G and Nexus/3G go even further: these devices allow the Teleservice features (over GPRS or Cloud connection).‎ The communications with alarms receiving centres are made possible by means of the most widely used protocols, including SIA-IP standard (for Nexus/G and Nexus/3G).‎ Nexus/G and Nexus/3G allow both the installer and the user to access the Inim Cloud and peer-to-peer services; they can be used both as a main device or as a backup device in the event of the loss of the hardwired LAN connection.‎ Nexus devices are not the usual devices for connecting to cellular networks.‎ They offer excellent performance, integrating with the INIM burglar alarm systems.‎ The installation is simple: they must be connected to the BUS like any other device and can be installed either on the central or in any position reached by the BUS so as to increase the reception quality of the field.‎ Once connected to the control panel, they provide an additional communication channel in addition to the PSTN, a channel from which it is possible to send voice or digital calls over the GSM / 3G network.‎ The control panels therefore have this second telephone number available, which in addition to answering incoming calls by making the voice menu available with DTMF commands to the enabled users.‎ With Nexus, the control panels send automatic or customizable SMS messages for each event, and the control panels can also receive commands sent via SMS.‎ So you can enable or disable scenarios and outputs, request the status of the device and much more.‎ The same operations are also possible with the recognition of a given caller number (CallerID).‎ Nexus / G and Nexus / 3G go even further.‎ In addition to all the functions listed above, they allow the management of the stations via the GSM / GPRS / 3G network.‎ The device connects to the IP address programmed in the control panel during installation, or to another IP address that the installer can decide from time to time and set by sending a simple SMS.‎ Shortly after receiving the SMS, the PC connects to the remote post office using the specified IP address.‎ Thus it is possible to activate a remote control session via GPRS / 3G to read / write the control panel programming, even away from the office or with a mobile connection such as "Internet-key", tethering or smartphone hotspots.‎