ISOLCORE - Вакуумные изоляционные панели

The Vacuum Insulated Panels are made by pressed minerals which are vacuumise using a particular cover.‎ CZ Panel’s core is mainly made of fiberglass which is covered by an aluminum and fiberglass coating.‎ These materials make panels more stronger to shearing and usury than other vacuum products.‎ Its cover make CZ Panel impermeable to gas and to steam increasing its length over time than a traditional panel.‎ Our panels are freed of all the air inside them until they reach very low pressures.‎ This process reduces the mobility of the few water molecules left, reducing its thermal conductivity that remains stable at 0,002 W/mK.‎ The advantages are INNUMERABLE.‎ Firstly, their short depth: 3 cm is the minimum for CZ Vacuum Panels Next, their mechanical resistance.‎ Thanks to the specific installation system CZ panels can insulate any type of building no metter the height.‎ THICKNESSES IN COMPARISON (CZ LAMBDA “D” = 0,002W/mK) - 1cm of CZ = 20 cm of rock wool - 1cm of CZ = 17cm of EPS - 1cm of CZ = 7.‎5 cm of aerogel - 1cm of CZ = 2-3 cm of other vacuum insulation USE - exterior walls - interior walls - roofs - floors (terraces - flat roofs - interiors) - ceilings (porches - garages - flats) ADVANTAGES - Great insulation - The cheapest in its category - The most resistant - Many different formats (including made-to-measure) - The thinnest in its category(only 3 cm total) Further info from manufacturer on CZ ISOLCORE