ANGLED ROOF DRAINS IN TPO

The 90° ANGLED ROOF DRAINS IN TPO RECTANGULAR, SQUARED AND ROUND TUBE is suitable for use on roofs made with synthetic TPO membrane.‎ The construction is studied down to the smallest detail, in fact the construction features optimal characteristics to eliminate serious and costly drawbacks created by traditional commercially available nozzles.‎ The material used for the construction of the nozzle is flexible UV-stabilised TPO, which offers a range of chemical and physical technical characteristics that can satisfy all needs for an elastic item, and provides high resistance to degradation caused by the sun, ozone and other atmospheric and chemical agents.‎ It can be used in a wide range of temperatures and is stable over time due to its physical and mechanical characteristics.‎ It is therefore a material that, due to its excellent quality, ensures perfect efficiency over the years.‎ The Angled Exhaust Vent consists of a truncated body, of variable cross-section, attached to a wide, smooth flange at a 90° angle, which allows total weldability to the diaphragm.‎ The main feature of the Angle Drain Pipe is that it can be used for draining terraces with free water fall, drains with external or internal downpipes, and in particular for horizontal drains on industrial buildings, flat roofs and in buildings with thick perimeter walls.‎ It can be connected to bends as follows: - Art.‎ 39.‎2P with elbows Art.‎ 40 - 41 - 42 - Art.‎ 45.‎10 with elbows Art.‎ 46 - 47 - Art.‎ 304P - 305P - 307P - 310P - 311P - 312P with elbows Art.‎ 315 - 320 or to other elbows in accordance with UNI EN 1451-1 Further info from manufacturer on ANGLED ROOF DRAINS IN TPO ITALPROFILI