SIMES APPLY LED wall-mounted die cast aluminium Outdoor spotlight

Apply is an aluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion.‎ Stone wash surface treatment prior to painting process.‎ A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance againstcorrosion.‎ The rearward set position of the optics ensures an excellent visual comfort and the total absence of glare.‎ To avoid accumulations of water, in the upper part of the luminare are provided a few holes that allow water drainage.‎ APPLY RECT.‎ MONO EMISSION S.‎2550H: 1 COB - 2700K - 4.‎9W  - 230V - CRI 90 S.‎2550N: 1 COB - 4000K  - 4.‎9W - 230V - CRI 80 S.‎2550W: 1 COB - 3000K - 4.‎9W - 230V - CRI 90 APPLY RECT.‎ DOUBLE EMISSION S.‎2552H: 2 COB - 2700K - 9.‎8W - 230V  - CRI 90 S.‎2552N: 2 COB - 4000K - 9.‎8W - 230V - CRI 80 S.‎2552W: 2 COB - 3000K - 9.‎8W - 230V - CRI 90 APPLY SQR.‎ MONO EMISSION S.‎2555H: 1 COB - 2700K - 9.‎6W - 230V - CRI 90 S.‎2555N: 1 COB - 4000K - 9.‎6W - 230V - CRI 80 S.‎2555W: 1 COB - 3000K - 9.‎6W - 230V - CRI 90 APPLY SQR.‎ DOUBLE EMISSION S.‎2557H: 2 COB - 2700K - 19.‎2W - 230V - CRI 90 S.‎2557N: 2 COB - 4000K - 19.‎2W - 230V - CRI 80 S.‎2557W: 2 COB - 3000K - 19.‎2W - 230V - CRI 90 Apply is a family composed of wall applique, ceiling and bollard, characterized by small size and maximized performance.‎ Apply ceiling is available in square version while Apply wall applique is available in square and rectangular version, both mono or double emission.‎ Apply bollard is able to orient the head of 20° towards the walkway.‎ The entire family is characterized by the total abscence of visible screws and the rearward position of the light source guarantee’s maximum visual comfort and a clear and sharp lighting effect.‎  Further info from manufacturer on APPLY SIMES