Sun Ballast

Sun Ballast 5° Sail system has been designed to take advantage of all the available coverage surface by optimizing the construction of the photovoltaic system.‎ This system allows to recover the area usually left for shading between the rows.‎ With the same space you can get to install about 20% more modules compared to a traditional system.‎ Also used in shorter sails or single rows allow you to raise the front of the plant up to 60 cm from the floor, reducing exposure to shadows given by any other structures present (railings, fireplaces, etc.‎).‎ It is possible to place the panels both horizontally and vertically.‎ Application: Any type of flat roof with a maximum slope of 5°, on the ground, on beaten ground with inert material or flooring.‎ Inclination angle: 5°.‎ With Sun Ballast® sail-shaped system 5° and 10° you will obtain more energy in less space.‎ Those who have been working in the photovoltaic industry for a while know which critical aspects they have to face during the installation stage, especially when it comes to positioning the system.‎ They often have to solve space issues to meet the power required by the client.‎ High railings, chimneys, air conditioning systems can make things even worse.‎ Finding the best solution means gaining an advantage that can be the key to getting a job and obtaining the utmost efficiency from the system.‎resistance and distributed load.‎ Further info from manufacturer on 5° SAIL SYSTEM Sun Ballast