Декоративные штукатуркиVAGA#VAGA#Plasters#Cement plasters#Hydraulic and hydrated lime based plasters#Construction
VAGA INTO+
Premixed dry base-coat plaster based on hydrated lime and cement for interiors and exteriors for mechanical application, highly workable, composed of: hydrated lime, Portland cement, selected sands and additives that improve workability and adhesion.
YIELD
- 1 m3 of ready-mixed mortar is equivalent to about 70 25 kg bags.
- 19 Kg x m2 x cm of plaster.
PACKAGING
VAGA INTO+ is supplied in 25 kg bags on 2-way pallets of 1500 kg (equivalent to 60 bags).
FIELDS OF USE VAGA
INTO+ is ideal for:
- thanks to its values of adhesion to the substrate and mechanical resistance, the creation of renders suitable for receiving adhesive for laying tiles, both indoors and outdoors;
- the creation of plasters, both indoors and outdoors, suitable for receiving cement or lime-based fi nishes;
- the construction of load-bearing masonry in cement, concrete, brick or natural stone blocks; the product complies with UNI EN 998-2 "MALTE PER MURATURA", classification M10; - D.M. 14 January 2008 "new standards for construction";
- the construction of masonry, including load-bearing masonry, in seismic areas, with reference to Ordinance of the President of the Council of Ministers (O.P.C.M.) no. 3274 of 2003 "technical regulations for construction in seismic areas", and no. 3431 of 2005 "further integrations to O.P.C.M. no. 3274 of 2003";
- the creation of internal and external plaster with excellent mechanical characteristics, in compliance with UNI EN 998-1 "MALTE PER INTONACI INTER INTERNI ED Esterni", classification CS IV;
- rendering and subsequent application of plaster on particularly smooth surfaces, such as concrete walls.
PREPARATION OF THE PRODUCT AND APPLICATIONMix
VAGA INTO+ with about 3.5 / 4.0 litres of clean water per bag, taking care to use the entire contents of each bag. For proper mixing, we recommend using a mechanical mixer (concrete mixer, auger mixer, etc.). Mixing is considered complete when a homogeneous mixture is reached. Do not prolong mixing beyond 3 minutes.
After mixing, apply the product within a maximum of 30÷40 minutes. Before applying the product, always make sure that the substrate is clean, free of crumbling parts, oils, grease and anything else that may compromise the adhesion of the mortar. In the case of temperatures above +30°C, it is advisable to moisten the substrate.
0
0
