Maltavista - Мортар для кладки

For making beautiful exposed masonry resistant to the passage of time.‎The special formulation makes MaltaVISTA suitable for making structurally sound exposed masonry, it guarantees water insulation and reduces efflorescence, the high plasticity allows the brick to be adjusted during laying.‎ YIELD - 1 m³ of ready-mixed mortar is equivalent to about 65 25 kg bags.‎ - 40 Kg xm2 of wall lined with 11.‎5x5.‎0x24.‎5 cm bricks.‎ PACKAGING MaltaVISTA is supplied in 25 kg bags on 2-way pallets of 1500 kg (equivalent to 60 bags).‎ APPLICATIONS MaltaVISTA is ideal for: - the construction of load-bearing, curtain walling or facing brickwork elements, such as: - masonry for exteriors and/or interiors, also load-bearing; - complex architectural works; - fine details; - urban furnishings.‎ The product complies with: - UNI EN 998-2 "MALTE PER MURATURA", classification M5; - D.‎M.‎ 14 January 2008 "new standards for constructions".‎ - the production of mortars for load-bearing brickwork in seismic areas, with reference to Ordinance of the President of the Council of Ministers (O.‎P.‎C.‎M.‎) no.‎ 3274 of 2003 "technical standards for constructions in seismic areas", and no.‎ 3431 of 2005 "further integrations to O.‎P.‎C.‎M.‎ no.‎ 3274 of 2003".‎ PRODUCT PREPARATION AND APPLICATION Mix MaltaVISTA with approximately 3.‎4 litres of clean water per bag, taking care to use the entire contents of each bag.‎ For proper mixing, we recommend using a mechanical mixer (concrete mixer, auger mixer, etc.‎).‎ Mixing is considered complete when a homogeneous mixture is reached.‎ Do not prolong mixing beyond 3 minutes.‎ After mixing, apply the product within a maximum of 30÷40 minutes.‎ The product must be applied by hand.‎ Make sure that the surfaces of the bricks are always clean, free of crumbling parts, oils, grease, and anything else that may prejudice the adhesion of the mortar.‎ In the case of temperatures above +30°C, it is advisable to moisten the bricks, taking particular care to use clean water free of any substance such as cement, lime, soil, oils, etc.‎, as even the slightest presence of any impurities would be absorbed by the brick, prejudicing the final result.‎