VISMARAVETRO SERIE 7200 Glass shower cabin with sliding door

The Serie 7200 comes with new features that improve the appearance without changing the fact that it reflects the production capabilities of Vismaravetro.‎ Smaller, more discreet frames enclose panels that slide smoothly on a ball-bearing slider system fixed to the glass and supported by a frame with a reduced size, yet still big enough to support the door without bending.‎ Watertightness is guaranteed by the waterstop at the base of the door.‎ Repair and everyday cleaning are made easier by the ability to unhook the door.‎ FIXED GLASS ASSEMBLED ON AN ALUMINIUM PROFILE The fixed glass is assembled on an aluminium profile of the same thickness, for easy adjustment and to avoid direct sealing between glass and shower tray.‎ DOOR EASILY DETACHABLE FOR MAINTENANCE The door is guided thanks to a sliding element in the lower gasket easily detachable for a rapidly and daily maintenance.‎ SLIDING SYSTEM.‎ DOOR’S HEIGHT CAN BE ADJUSTED.‎ LOWER PROFILE OF EXTREMELY REDUCED SIZE Lower profile of extremely reduced size, with the possibility of non-installation in the passage under the door (pay attention as to this assumption the water tightness is reduced).‎ THIS MODEL IS PRODUCED WITHOUT SILICON DOOR OPERATION The doors hung on the top track through trolleys fixed directly to the glass.‎ In case of large doors larger than 60 cm, the rolleys are doubled to ensure a smooth and light running and with higher weights.‎ The door is guided thanks to a sliding element in the lower gasket easily detachable for a rapidly and daily maintenance OVERLAP BETWEEN DOOR AND FIXED GLASS The overlap between door and fixed glass is always kept to a minimum.‎ Few millimeters of overlap are necessary to ensure correct door regulation.‎ Once you have picked the right model for your needs, Vismaravetro will make the shower enclosure to measure, with a level of detail down to the nearest centimetre.‎ Vismaravetro can also meet special requests restricted by the architecture of the bathroom, such as the presence of low walls or seats, attics, sloped ceilings, mansards or wall protrusions.‎ Further info from manufacturer on SERIE 7200 VISMARAVETRO