Yestate Logo

#цемент

22 материалов с этим тегом

Блог(2)

Продукты(20)

KIMIA BETONFIX WW

Betonfix WW is an ultra-rapid setting cement powder.‎ The product achieves excellent mechanical resistances, even under water.‎ Betonfix WW is a ready-to-use, easyapplication, metal-free single-component product.‎  USES: Betonfix WW It is used to buffer water leaks, even under pressure, in order to apply waterproofing treatments.‎ In the case of recurrent leaks, thoroughly clean and widen the cracks to fill, mix the product and wait for the setting to start (about 2 minutes, depending on the te

LEGO PLUS - LP 159

LEGO PLUS - LP 159 is a premixed, superfluid, expanding cementitious binder for the production of mortars, grouts and concretes with high mechanical strength also with short curing time and resistance to aggressive environmental agents.‎ Preliminary mixture tests are essential.‎ PARTICLE SIZE Depending on the application AVERAGE CONSUMPTION grout: 400-500 kg/m² anti-shrinkage concrete: 350-450 kg/m² grout: 550-600 kg/m² anti-shrinkage concrete: 450-500 kg/m² MIXING WATER (% BY MASS) grout/concr

Winkler OSMOWIN SUPER

OSMOWIN SUPER is a cement-based premixed waterproofing agent, especially designed for waterproofing treatments in pools, tanks or drinking water reservoirs.‎ It offers high workability and high counter-thrust resistance.‎ APPLICATION It can be applied with brush or metal trowel.‎ Maximum thickness 2 mm.‎ CONSUMPTION 1.‎6 kg/m² for 1 mm thickness.‎ USEFUL ADVICES Ensure that the application surfaces are clean, dry, and free of crumbling, foreign or powdery parts.‎ We recommend applying in two

POZZOLANICO CEM IV/A 32,5R - Цемент

POZZOLANICO CEM IV/A 32,5R is a high initial strength cement.‎ The composition complies with UNI EN 197/1: clinker 65-89%, pozzolan, fly ash and any minor constituents 35-11%.‎ Calcium sulphate is added to regularise setting.‎ The product is characterised by a lower clinker content in favour of mineral components with pozzolanic activity.‎ Reducing the clinker content saves natural resources on the one hand and reduces CO2 emissions on the other.‎

Holcim Italia POZZOLANICO CEM IV/A 42,5R

POZZOLANICO CEM IV/A 42,5R is a normalised high-strength cement.‎ It has high initial strength, composition in compliance with UNI EN 197/1, clinker 65-89%, pozzolan, fly ash and any minor constituents 35-11% and adequate addition of calcium sulphate to regularise setting.‎ The product is characterised by the lower amount of clinker in favour of mineral components with pozzolanic activity.‎ Reducing the clinker content saves natural resources on the one hand and reduces CO2 emissions on the othe

Holcim Italia GIUSTO CEM II/B-LL 32,5 R

Giusto is a cement for structural applications, massive castings and industrial floors, recommended for making concrete with a characteristic strength of less than 30 "C25/30": the dosage of this binder depends on the characteristics to be obtained from the concrete (fresh and hardened) and any other components used.‎ Features - Cement Portland cement composite type II; contains 65% -79% clinker, 21%-35% limestone and minor constituents for the remainder - Multi-purpose product recommended for

Holcim Italia CEM II/A-LL 42,5 R

CEM II/A-LL 42,5 R is a type II 42,5 Portland cement characterised by its excellent initial strength.‎ It is designed for structural concrete works in moderately aggressive environments.‎ By guaranteeing an immediate development of initial strengths, the product offers the possibility of increasing the mechanical performance at the pit with a significant impact on the production time of concrete elements.‎ It can also be used for restoration work and for the production of manufactured goods.‎ Th

CEM IIB LL 32,5 R - Цемент

CEM IIB LL 32,5 R is a type II composite Portland cement with good initial strength and is designed for structural concrete works exposed to moderately aggressive environments.‎ Due to a balanced development of the heat of hydration and good strength, it is suitable for pours in hot climates, for standard structures and massive castings.‎ The limestone material in addition to the clinker in the binder composition gives the products made from this type of cement a high aesthetic quality, uniform

CEM I 52,5 R - Цемент

CEM I 52,5 R is a type I Portland cement with very high normalised strength and high initial strength.‎ This Cement is designed for structural concrete works in moderately aggressive environments.‎ It is suitable for applications where rapid development of mechanical performance is required, and thanks to the rapid development of hydration heat, it offers the possibility of casting concrete during cold climates by speeding up setting and hardening.‎ If used with new-generation hyper-plasticising

Holcim Italia ECOPLANET IIB4

EcoPlanet IIB4 is a type II composite Portland cement; it contains 65 to 79 per cent clinker, 21 to 35 per cent limestone and minor constituents for the remainder.‎ Features: Designed to offer the same benefits as a Type ‘A’ limestone Portland cement, but with a ‘significant reduction in the CO2 emitted for its production.‎  A product with high initial strength, suitable for reducing the time required for skimming, particularly recommended in cold periods.‎  Multi-purpose product recommended f

ECOPLANET PRIME

ECOPLANET PRIME is a green cement characterised by low hydration heat development with good initial strength and conforming to UNI EN 197/1, it is designed to guarantee high durability in structural concrete works exposed to aggressive environments (such as sulphate resistance), according to UNI 9156.‎ The composition includes a reduced clinker content of 45-65% and a calcined natural pozzolan and ash content of between 36 and 55%.‎ The pozzolanic connotation of the product makes it highly resis

I.PRO GEOMIX® - Самовыравнивающийся стяжка

Highly spreadable, volumetrically stable, fluid backfill mix with controlled geotechnical characteristics.‎ i.‎pro GEOMIX® is a material that can be perfectly assimilated to artificial ground: it allows excavations and trenches to be filled quickly and, where necessary, removed easily by manual means.‎ The volumetric stability makes i.‎pro GEOMIX® the ideal solution for filling in road excavations without the typical settlements of natural soil.‎ i.‎pro GEOMIX® is also recommended for inertising

GIGA VLH IV B (P) 22,5 - Цемент

GIGA VLH IV B (P) 22,5 cement is a UNI EN 14216 compliant cement of very low heat of hydration type.‎ Colour Grey Composition GIGA VLH IV B (P) 22,5 is a hydraulic binder whose hydration reactions are identical to those of cements according to UNI EN 197.‎1, but whose hydration process is slower as a result of the composition, fineness or reactivity of the constituents.‎GIGA VLH IV B (P) 22.‎5 according to the composition prescribed by UNI EN 14215 (referring to the mass of cement excluding cal

FIBROCEM - Цемент

FIBROCEM is a special type of Portland Composite (II BLL) cement according to EN 197.‎1, designed to meet the needs of manufacturers of fibre cement products.‎ Composition FIBROCEM according to the composition prescribed by EN 197.‎1 (referring to the mass of the cement excluding calcium sulphate and additives) contains 65 to 80% clinker, 15 to 30% limestone while the remainder is made up of secondary constituents including microsilica.‎ Use FIBROCEM due to its special composition is used in t

PORTLAND FERRICO 42,5 N SR0

PORTLAND FERRICO 42,5 N SR0 is a Portland cement (type I) with High Normalised Strength and Ordinary Initial Strength according to EN 197.‎1.‎ It is classified SR 0 according to EN 197.‎1 Colour Grey Product advantages ULTRACEM 42.‎5 N SR 0's high ultimate strengths and its regular development and low heat of hydration in the first period after casting recommend its use in high performance concretes that need to mitigate the risk of thermal cracking and prolong workability retention, particul

TERMOCEM GREEN 42,5

TERMOCEM GREEN A 42,5 N: CEM III/A 42,5 N is a type III high-strength standardised blast furnace cement.‎ Composition In accordance with the composition prescribed by standard UNI EN 197-1 (i.‎e.‎ referring to the mass of cement excluding calcium sulphate and additives), it contains 35% ÷ 64% clinker, while the remaining part consists of granulated blast furnace slag and any secondary constituents.‎ STANDARD REQUIREMENTS (UNI EN 197-1) Advantages The content of granulated blast furnace slag (3

TERMOCEM GREEN 32,5 - Цемент

TERMOCEM GREEN 32,5 N - LH is a blast furnace cement with a content of pre-consumer recycled material of more than 30 % and is produced with CO2 emissions (Core Processes) of less than 550 kg/t compared to a figure of more than 750 kg/t for a CEM I.‎ Composition Contains, according to EN 197-1 (i.‎e.‎ composition referring to the cement core with exclusion of calcium sulphate and additives), 35 - 64 % clinker, 60 - 30 % granulated blast furnace slag and 0 - 5 % minor constituents.‎ Sustainabil

TECNOCEM - Класс 42,5 R

TECNOCEM® A-LL 42,5 R is a standardised, high-strength, type II limestone Portland cement with high initial strength.‎ It contains, in accordance with the composition prescribed by UNI EN 197-1 (i.‎e.‎ referring to the mass of the cement excluding calcium sulphate and additives), 80% ÷ 94% clinker, while the remaining part consists of limestone with TOC ≤ 0.‎20% by mass (LL) and any secondary constituents.‎ The hygrometric shrinkage and heat of hydration, both of which are moderate in relation t

Heidelberg Materials ULTRACEM CLASSE 52,5

Termocem Green 42.‎5 N-LH is a blast furnace cement with a pre-consumer recycled content of more than 30% and is produced with CO2 emissions (Core Processes) of less than 550 kg/tonne against a figure of more than 750 kg/tonne for a CEM I.‎ Composition In accordance with EN 197-1 (i.‎e.‎ composition referring to the cement core excluding calcium sulphate and additives), it contains 35%-64% clinker, 36%-65% granulated blast furnace slag and 0%-5% minor constituents.‎ Use The high mechanical str

DURACEM® 42,5 - Цемент

DURACEM A 42.‎5 N a.‎r.‎s.‎ is a standardised high-strength pozzolanic cement with high resistance to sulphates.‎ Composition It contains, in accordance with the composition prescribed by UNI EN 197-1 (i.‎e.‎ referring to the cement core excluding calcium sulphate and additives), 65% ÷ 89% clinker, while the remaining part is made up of pozzolana (P), fly ash (V) and any minor secondary constituents.‎ It also has a C3A content of less than 6%, which, in accordance with UNI 9156, qualifies it in

НавигацияВыбратьESCЗакрыть