ALUSCALAE BRERA - Перила из алюминия

BRERA is a handrail with vertical aluminium beams.‎ The Brera model with vertical aluminium beams owes its essentiality to the fact that the aluminium infill is supported by two upper and lower load-bearing elements, the upper of which also acts as a handrail The system is composed of uprights in extruded aluminium EN AW 6005 T6 (code MON06030).‎ The horizontal structure consists of a handrail in double extruded aluminium coupled with a rectangular section, the lower part of which also acts as a restraining element for the vertical aluminium beams.‎ Types of anchorage of the uprights: - on the floor: floor anchorage bracket with a pair of solid steel rods fixed to the upright by means of stainless steel pins and chemical resin injected into the holes in the floor.‎ Alternatively, anchorage can be made in the traditional system of angle bracket and mechanical dowels.‎ - to slab: by means of special L-shaped brackets screwed to the upright and anchored to the slab by means of mechanical dowels.‎ Screws and dowels for anchoring the structure in stainless steel if outdoors, in galvanised steel if embedded in the slab casting.‎ Treatments: - the Brera model railing can be supplied with silver anodic oxidation treatment, satin silver or painted in any RAL colour and other finishes chosen by the customer