NOPOL W ATS - Защитное покрытие для бетона

NOPOL W ATS is a two-component liquid epoxy product in water emulsion, designed to ensure high performance while being environmentally friendly.‎ Enriched with leveling agents and adhesion promoters, NOPOL W ATS offers low viscosity and deep penetration, making it ideal for the protection and consolidation of industrial concrete floors.‎ Key Features: High Penetration: Effectively seals the pores and capillaries of concrete.‎ Eco-Friendly: Water-based formulation, free from organic solvents and VOCs.‎ Versatile Application: Suitable for various application methods and surfaces.‎ Aesthetic Improvement: Provides a wet-look effect that enhances the concrete.‎ Chemical Resistance: Excellent resistance to numerous acids, bases, and oils.‎ Application Method: Preparation: Pour component A into component B and mix thoroughly using a drill with a mixing paddle.‎ Gradually add clean water until the correct viscosity is achieved.‎ Application: Apply the product in two or three coats, spaced 12/24 hours apart, depending on temperature and humidity.‎ Recommendations: Ensure the surface is clean and free of oils and greases.‎ Moisten the substrate if it is too dry and absorbent.‎ Ensure adequate air exchange during application.‎ Chemical Resistance: 10% Ammonia: EXCELLENT 10% Lactic Acid: EXCELLENT Skydrol: EXCELLENT Deionized Water: EXCELLENT 10% Sodium Hydroxide: EXCELLENT Bleach: EXCELLENT 10% Sodium Hypochlorite: EXCELLENT NOPOL W ATS is the ideal solution to make industrial concrete floors impenetrable.‎