CASCADE Floor overflow pipe with water level Accessory for fountain

The floor overflow pipe with water level control for fountains, made of stainless steel and brass, is a combined system including water level control and the floor overflow pipe in a single solution.‎ In the overflow function, it avoids the accidental overflow of the fountain tank caused by possible malfunctions of the replenishment system or by an excess of rain.‎ It is particularly useful for nozzles needing a maximum water level for a correct functioning.‎ In the level control function, thanks to its 3 or 4 sensors with 10 m long H07RNF 3×1,5 mm2 or 4×1,5 mm2 cable and sliding track for their regulation, allows to guarantee a minimum water level inside the tank.‎ Possible addition of the fourth sensor when, besides the replenishment, it is needed also the pump stop to avoid a dry functioning.‎ Especially useful when it is neither possible to work on the fountain tank’s walls nor to use a built-in overflow pipe.‎ To be used with 3/4-sensor water level controller or 3/4-sensor water level control group.‎ Standard height of 50 cm, different height upon request.‎ Further info from manufacturer on Floor overflow pipe with water level CASCADE