CUF Milano - Ресепшн-стойка

A reception desk programme that offers a large number of configurations.‎ The single counters are available in 4 types and with worktops in two different depths of 60 or 80 cm.‎ Composite counters, using worktops with depth of 60cm, are available in 21 different types.‎ Two adjoining elements are made integral with each other not only by through metal pivots placed in the vertical panels, but also by a shared metal leg placed under the countertop.‎ The right and left end elements come in 4 different types.‎ The central elements are available in 2 different types, while a single corner element can be used either right or left.‎ The 90 cm deep consultation table top, on the other hand, is available in 3 different types: right, left or central.‎ The range is completed by side extensions, which are also available in two different types: one with vertical panels, like the other system components, and the other with metal legs.‎ The two different types have been designed so that these elements can be used to complete the perimeter system, or shared between several adjacent stations.‎ Extensions with metal legs can be assembled to a work surface indifferently in the right or left position, but also in the middle of two contiguous work surfaces.‎ For extensions with perimeter panels, the right and left elements are provided.‎ For each of the counter types there are 3 different worktop lengths (160, 140 and 120 cm), while for the extension counters and side extensions there are worktops with lengths of 120, 100 and 80 cm; an exception is the consultation worktop available in a single length of 100 cm.‎ All elements of the series, whether vertical panels or horizontal elements, are made of 30 mm thick melamine chipboard edged with 2 mm Abs edge.‎ Edges and corners are radiused 2 mm.‎ The vertical panels, as well as the reception fronts and shelves, have a 45-degree section, appropriately designed to avoid sharp edges.‎ Standard finishes Moon White, Light Grey and Doria Oak with the possibility of obtaining configurations in which the worktop, shelf and reception front and structural parts have different colours.‎ Canapa and Peltro finishes are available upon request and order.‎ All metal parts are epoxy powder-coated without heavy metals and are available in the standard colours Anthracite, White, Sun Yellow and light blue with a smooth matt surface finish for all four colours.‎ Further info from manufacturer on ENNEPI CUF Milano