DIASEN - Антигрибковая краска

White coating, latex-based with specific mineral powders, that, thanks to insulating features, allow to keep surfaces warmer, eliminating thermal bridge.‎ there is a +5°C of difference between the surface treated with C.‎W.‎C.‎ and the one treated with a traditional paint.‎ These heat degrees also prevent the air from condensing onto the wall, even if there is a relative humidity in the room (up to 90%), the condensation is eliminated and therefore also moulds.‎ ADVANTAGES • Do-it your self • Definitive and cheap solution • Hygienic reclamation of residential environments • It is possible to paint on the product with hydropaint • Final physical solution (not chemical) USES Painting of cold surfaces that cause condensation and the spreading of mould.‎ To cover pillars, reinforced cement walls, not insulated walls and against thermal bridges.‎ APPLICATION Remove any presence of mould washing the surface with bleach (1 part) diluted with water (10 parts).‎ A fixative is not necessary and the product can be applied onto the existent paint.‎ Dilute with 10-15% of water and apply by brush.‎ 1.‎Apply a first coat by brush making sure to completely cover the surface and with a very thin layer.‎ 2.‎When the first coat is dry, apply the second one.‎ 3.‎With great mould and thermal bridges, apply a third coat, taking care to obtain a total thickness of about 0,7 mm.‎ TECHNICAL DATA Aspect White creamy Difference of temperature onto concrete.‎ +5°C Superficial drying temperature +5°C Steam permeability (high transpiration) μ =8 Resistance after 50 cycles freezing/defrosting (-15°C /+ 15°C) (UNI EN 202) Inaltered YIELD Lt/m² 0,5-0,7.‎ PACKAGING Tin of Lt 5.‎ Plastic pail of Lt 15.‎ COLOUR White.‎ STORAGE Store the product in the dark in temperatures between +5°C and +35°C.‎ Use by: 24 months.‎ Further info from manufacturer on C. W. C. Stop Condense DIASEN