Eurograte - GRP (стеклопластиковые) перила

EUROGRATE® GRP handrails and railing are made in Italy using an exclusive pultrusion process (polymerisation of a profile pulled through a heated die) and may contain up to 70% fibreglass, ensuring a high degree of mechanical resistance.‎ The handrails are made of glass fibres and textiles, ensuring excellence resistance to impact and fatigue (overloading does not cause permanent deformations).‎ GRP (fibreglass) handrails and railing are lightweight, easy to install and cost-effective, since they require no painting and are maintenance free.‎ EUROGRATE® GRP handrails and railing are designed with standard modular elements to which a range of accessories can be added, making them adaptable to any need and easy to install.‎ Our GRP railing and handrails are fully compliant with standard EN 14122-3, meeting the following specifications: when a handrail is installed, walking surfaces above a height of 500 mm must prevent the fall of objects; the minimum height of GRP railing must be at least 1100 mm above the walking surface; the handrail must include at least one intermediate kneerail; the maximum clear space between horizontal rails must not exceed 500 mm.‎ The toe-plate must be installed at a maximum height of 10 mm from the walking level.‎ The maximum span between stanchions must not exceed 1500 mm.‎ GRP (fibreglass) handrails and railing are made using a standard resin system: isophthalic polyester and standard colours: safety yellow or grey, but other colours and other resins, such as vinylester or phenolic, are available on request.‎ GRP handrails and railing are made using thermosetting resins as a chemical-resistant matrix.‎ The matrix material is based on an isophthalic polyester resin system which binds with the glass fibres and gives the chemical resistance to the final product.‎ Other types of resin are also available, such as vinyl esters, acrylics, and self-extinguishing halogen-free resins with low smoke emissions.‎ The resin systems are all certified to AFNOR or ASTM standards.‎ The mechanical reinforcement uses unidirectional fibreglass filaments of E-glass roving.‎ Reinforcements and protection (the hallmark of EUROGRATE® quality) Every EUROGRATE® pultruded profile is manufactured using continuous multidirectional glass mats that increase transverse mechanical resistance.‎ A polyester veil is incorporated on the surface, ensuring protection from UV radiation and weathering.‎ BENEFITS OF GRP (FIBREGLASS) RAILING AND HANDRAILS corrosion resistant; lightweight; electrical insulation; maintenance free; easy to install; internal colour; do not require earthing; radio transparency.‎