FILA Solutions ACTIVE1 - Антигрибковая система

FILAACTIVE1 - Active mould Remover.‎ What It’s For Rapidly removes mould and sanitises stone, plaster, cement, grouting, ceramic, glass and marmorino plaster surfaces.‎ Advantages Easy-to-use, ergonomic container with spray applicator.‎ Ideal viscosity: can be easily applied to walls.‎ Acts rapidly and effectively within a few minutes.‎ Effectively removes mould from grouting.‎ Materials to be treated Porcelain Ceramic Natural stone Grout joints Concrete Terracotta Wall Paint Packaging 500 ml bottles with spray nozzle (trigger): 12-piece cartons.‎ TECHNICAL DETAILS HOW TO USE IT Ready to use: no dilution required Application: Spray FILAACTIVE1 directly onto the surface to be cleaned, from a distance of about 15-20 cm, while keeping the bottle upright.‎ Leave to act for approximately 15 minutes.‎ Soak up any excess product with a damp cloth to prevent dripping.‎ Repeat if necessary, then wipe the surface clean with a damp sponge.‎ Caution: do not spray on plants, fabrics and metals.‎ Should this occur, wash immediately with water.‎ Do not use on new polished stone.‎ Caution: before using on coloured plaster, first try on a small section to avoid possible colour alterations.‎ WARNINGS • Keep out of reach of children.‎ • Do not disperse into the environment after use.‎ • Do not use in conjunction with acids.‎ It may produce hazardous gas (chlorine).‎ • Ventilate the room during and after application.‎ • Do not remove dry mould in order to prevent dispersion of the spores.‎ TEMPERATURES Storage temperature: from 5° to 30° C.‎ The product should be applied to materials with temperature between 5° and 30°C.‎ CONTAINS Non-ionic surfactants < 5%, chlorine bleaches 5-15%.‎Contains: 5% active chlorine solution.‎ UK MARKET ONLY: HSE NO 9667.‎