MATT - Защитный воск с матовым эффектом

MATT is a protective wax with a natural effect.‎ What it is used for - For the maintenance and matt finishing of floor treatments in terracotta, klinker, antique marble, natural stone.‎ - It is the ideal finish after water-based waterproofing.‎ - Ideal on interior brick and natural stone walls, decorative plaster, reconstituted stone and concrete cladding to prevent dusting and provides surface consolidation.‎ Advantages - Gives a natural effect - Has a high concentration: can be used at various dilutions according to need - Polished, it gives a satin effect - It is completely removable - It has an excellent self-levelling power - It is repellent to dirt and dust - The finish with MATT maintains a breathability of at least 90% compared to the untreated material Application materials Cotto Klinker Unpolished stones and agglomerates Tufa Resin How to use Dilution either pure or diluted as required.‎ For the protection of floors and walls: Dilute MATT slightly to make it more fluid and easier to apply by adding 200 ml of water per litre of product.‎ On a dry and clean surface apply an even coat of MATT with a fleece (wall brush).‎ Wait until completely dry (about one hour) and then apply a second coat crosswise to the first one.‎ Once dry (approx.‎ one hour) the floor can be walked on.‎ If a slight increase in gloss is desired, the floor can be polished with a woollen cloth or polishing machine.‎ On terracotta and highly absorbent stones (e.‎g.‎ pietra serena, rough quartzite) it is advisable to previously apply a coat of waterproofing such as FOB XTREME or W68.‎Renewing the finish (every 2-3 months): after cleaning the surface with a diluted solution of CLEANER PRO (1:200), apply MATT by diluting 500 ml.‎ of product in 5 litres of water.‎ Once dry, the floor can be walked on.‎ Restoring the protection: de-wax the surface with PS87 PRO cleaner diluted 1:5.‎ When the floor is dry, apply the wax slightly diluted (200 ml water per litre of product) with a fleece, mop or other applicator.‎ Once dry, the floor can be walked on.‎For Anti-dust treatment: on a dry surface apply an even coat of pure MATT with a brush.‎ After approx.‎ 1 hour the treated surface is dry.‎ TOOL CLEANING: clean with water immediately after use.‎ For routine maintenance: diluted solution of CLEANER PRO (1:200).‎ Packaging 1 litre: cartons of 12 pieces.‎ 5 litres: cartons of 4 pieces.‎ Further info from manufacturer on MATT FILA Solutions