LUXSOLAR LXS-PRT-H-R

LXS-PRT-H-R is a round-shaped composition consisting of 16 ASPSL-LXS heliport beacons and 16 TLOF-LXS-FLT / TLOF-LXS-INSET heliport beacons.‎ Beacons: TLOF-LXS-FLT The TLOF-LXS-FLT, green in colour, is used to define the perimeter of the TLOF (Touchdown and Lift-Off) area, intended to contain the aircraft in its maximum footprint.‎ It may be circular or square or, less commonly, have other shapes.‎ Within the TLOF area, the maximum height of markers and wiring must be less than 25mm and driveable.‎ Features Height < 25mm Resistant up to 5000 kg Can be integrated into existing surfaces without additional construction work Fully compliant with international ICAO and EASA regulations TLOF-LXS-INSET A TLOF (Touchdown and Lift-Off area) signalling system must be provided for every heliport where night operations are carried out.‎ This system consists of lights emitting a fixed, omnidirectional, green light beam, arranged around the perimeter (which may be circular or square) of the landing/take-off area.‎ The TLOF area can be circular (in this case, a minimum of 14 lights are required), or square (in this case, a minimum of 4 lights are required on each side, including those placed in the corners, and installed at a maximum distance of 3 metres from each other).‎ The development of a TLOF system using the LUXSOLAR LXS-ONE INSET beacon guarantees long life (thanks to the use of LED technology), ease of installation and minimal footprint on the pitch (protrusion of only 12.‎54 mm).‎ Features Based on LED technology GREEN light - Fixed Intensity: 30cd Life expectancy >10 years Low consumption Projection 12.‎54mm Carriageable surface Degree of protection: IP66 No RF radiation Easy to install Fully compliant with ICAO and EASA regulations (ISO/IEC 17025 accredited third-party laboratory) ASPSL-LXS The LUXSOLAR ASPSL-LXS product defines the circumference of the TDPC area.‎ The beacon is driveable and suitable for both ground and elevated helipads.‎ Features Amber light Load resistance up to 5,000kg Height: <25mm Operating temperature: -20°C / +60°C PMMA and toughened glass lenses Infrared LEDs available as an option Conforms to ICAO Annex 14, Volume 2 Heliports, EASA CS-HPT-DSN, EASA PTS-VPT-DSN and CAA CAP 1264 standards Further info from manufacturer on LXS-PRT-H-R LUXSOLAR