Malvin

Concentrated elastic acrylic-siloxane dispersion, specific for optimising the workability, adhesion, flexibility, resistance and water repellency of mortars, with high breathability, specifically for recovery, conservative and monumental restoration work; ready touse or to be diluted with clean water, to be mixed with the INTOCALCE and INTOBIO line in order to obtain an improvement in the characteristics of adhesion to the substrate, resistance, water repellency, elasticity and as an additive in the realisation of gypsum products to prevent surface chalking and to improve mechanical resistance.‎ As a fixative and surface aggregating agent for interior plaster and frescoes; as a consolidating and fixing agent for pictorial layers; as a binder for natural and synthetic pigment powders; as an adhesive for the glazing of paper documents.‎ Free from ethoxylated alkylphenols, plasticizers and coalescents.‎ PACKAGE: 5 - 10 - 20 lt can COLOUR: White USE: Indoor/Outdoor DILUTION: AS ADDITITIVE: Use undiluted when a highly deformable mortar with very high adhesion performance is required, to be used on substrates with strong dimensional variations and generally difficult adhesion.‎ Use diluted 1:1 with clean water when a generally deformable mortar with good adhesion performance is required, to be used on substrates subject to moderate dimensional variation.‎ Use diluted 1:5 with clean water when you want to improve adhesion and elasticity characteristics.‎ AS CONSOLIDATING PRIMER: Use diluted 1:5 with clean water as a fixative and surface aggregating agent for interior plaster and frescoes; consolidating and fixing agent for pictorial layers.‎ OTHER USES: Use diluted 1:3 to 1:4 with clean water as a binder for natural and synthetic powder pigments.‎ Further info from manufacturer on INTOSIL Malvin