BITUVER M-25 - Мембраны для гидроизоляции

BITUVER M-25 waterproofing membranes are made with a special elastoplastomeric APAO compound, based on metallocene resins.‎ Cold flexibility: -25°C The reinforcement consists of a very high grammage non-woven polyester fabric with continuous thread reinforced with glass fibre.‎ The 4 mm versions (both mineral and smooth) are certified for single-layer use.‎ Uses BITUVER M-25 membranes are used on roofs of all types.‎ They are suitable as underlays, finishing layers, single-layer, underground structures, retaining walls and foundations.‎ Application Use the PPE required by law Clean the substrate properly It is always recommended to prepare the substrate with bituminous primer Bituver ECOPRIVER The product is suitable for flame application by heating with a propane gas torch the lower face coated with a special thermofusible film Always apply between +5° C and + 35 °C Storage Keep the rolls in the warehouse, away from sunlight and at a temperature not lower than +5°C.‎ Keep rolls in an upright position.‎ Avoid overlapping pallets if possible.‎ We recommend using the product within 2/3 months after delivery.‎ Further info from manufacturer on BITUVER M-25 Saint-Gobain - ISOVER