BITUVER S-30 - Префабрикатная битумная мембрана

BITUVER S-30 waterproofing membranes are made with a special elastomeric compound BPE The polymers used ensure very high elasticity and adhesion.‎ Cold flexibility: -30°C The reinforcement consists of a very high grammage non-woven polyester fabric with continuous thread reinforced with glass fibre.‎ The 4 mm Mineral version is certified for single-layer use.‎ Uses BITUVER S-30 membranes are used on roofs of all kinds.‎ They are suitable as underlays, monolayers, underground structures, retaining walls and foundations.‎ Application Use the PPE required by law Clean the substrate properly It is always recommended to prepare the substrate with bituminous primer Bituver ECOPRIVER The product is suitable to be flame applied by heating with a propane gas torch the lower face coated with a special thermofusible film Always apply between +5° C and + 35° C Storage Keep the rolls in the warehouse, away from sunlight and at a temperature not lower than +5°C.‎ Keep rolls in an upright position.‎ Avoid overlapping pallets if possible.‎ We recommend using the product within 2/3 months after delivery.‎ Further info from manufacturer on BITUVER S-30 Saint-Gobain - ISOVER