STIFERITE

The STIFERITE SYSTEM SLOPING is made to measure for each individual building site following an executive project which assesses the amount of slope required, the level of thermal insulation envisaged, the type of STIFERITE panel most suitable for the specific application, the position of the drains, the optimal modularity, etc.‎ The STIFERITE SYSTEM, manufactured on the basis of the executive project, is delivered to the building site on pallets with the individual elements coded and numbered according to the production and installation list.‎ Manufactured by an ISO 9001, OHSAS 18001 and ISO 14001 certified company.‎ CE conformity marking on the entire range.‎ STIFERITE SYSTEM STIFERITE SYSTEM Class S consists of an EPS base with STIFERITE Class S panel, coated on both faces with saturated glass tissue.‎ Suitable for the application of bituminous and synthetic membranes using cold fixing systems.‎ STIFERITE SYSTEM STIFERITE Class B is made up of an EPS base with STIFERITE Class B panel, coated on the upper face with bituminous glass fibre laminated with PP and on the lower face with saturated mineral fibre.‎ Suitable for the application of bituminous membranes by torch-bonding.‎ STIFERITE SYSTEM STIFERITE GTC consists of an EPS base with STIFERITE GTC panel, coated on both faces with Politwin®.‎ Suitable for the application of bituminous and synthetic membranes using cold fixing systems.‎ To view the technical data sheet, safety data sheet and declaration of conformity see: http://www.‎stiferite.‎com/poliuretano_Pendenzato.‎html