Xella Italia MULTIPOR ExSal THERM M2

Multipor ExSal Therm easily rehabilitates damp walls with the presence of salts such as nitrates, sulphates or chlorides and also offers the added value of thermal insulation at the same time.‎ Older buildings, historic buildings or even listed buildings are rarely adequately protected against rising damp.‎ In some cases, salts are present in the built area and in the building materials used.‎ These salts seep into the masonry through rising damp and leave a visible white, crystalline, downy layer on the inside.‎ Multipor ExSal Therm combines many advantages in one product.‎ Compared to other systems, it not only desalinates the masonry, but also offers optimal thermal insulation.‎ In addition, the masonry does not have to be reclaimed in advance at high costs.‎ Applied to the interior surface, the Multipor ExSal Therm system, consisting of panel and mortar, is particularly suitable for listed, historic or old buildings, which are usually not only affected by masonry renovation, but also by energy upgrading of the building.‎ Facades are maintained in their integrity and historical value.‎ Multipor ExSal Therm can be applied directly to walls.‎ Long drying and plastering periods are no longer necessary.‎ In addition, Multipor ExSal Therm can be installed in inhabited buildings, portions of buildings, and external scaffolding is not normally required.‎ Solid, mineral, monolithic insulation material consisting of calcium silicate hydrates, lime, sand, cement, water and aerating agent (porosity >95% Vol.‎).‎ Bio-architecturally and microbiologically harmless, with inhibiting effect against fungi and microorganisms, fully recyclable.‎ High resistance to salts.‎ Interior insulation of walls degraded by rising damp and salt efflorescence (without fire resistance requirements).‎ Multipor is the brand for environmentally friendly, non-flammable insulation boards.‎ The mineral insulation material for interior and exterior use is made in an environmentally friendly and energy-saving way from sand, limestone, cement, and water without any plastics.‎ Multipor insulation ensures good thermal insulation and a pleasant indoor climate in new-build projects as well as refurbished buildings.‎ Thanks to their natural raw materials, Multipor insulation boards are highly recyclable.‎ They have the Environmental Product Declaration (EPD) by the Institut für Bauen und Umwelt (IBU).‎ The insulation material has also been awarded the natureplus seal of quality, certifying it as a sustainable, future-proof product.‎