Brunata ZENNER

Temperature sensor for heat and cold metering.‎ The temperature sensor pairs with platinum precision resistors for combination with all common calculators at measuring points for heating and cooling energy consumption.‎ Temperature sensor pairs are used to determine the flow and return temperatures in closed water circuits of heating and cooling systems.‎ Depending on the requirements of the measuring point, they can be installed in an immersion sleeve or directly in the heat transfer fluid.‎ Temperature sensor pairs are used to determine the flow and return temperatures in closed water circuits of heating and cooling systems.‎ Depending on the requirements at the measuring point, they can be installed in an immersion sleeve or directly in the heat transfer fluid.‎ All variants have a MID type examination certificate in accordance with Directive 2014/32/EU and are supplied with a corresponding conformity assessment.‎ Selected variants also have a national type examination certificate for cold measurement in Germany and a conformity assessment according to PTB Technical Guideline K 7.‎2.‎ Therefore, these variants can be used universally for heat and cold measurement and offer a considerable logistical advantage.‎ In addition, a new type of Temperature sensor 'Universal 6 x 60 - 230' is available, which can be used for all standard immersion sleeves with an installation length of 50 to 210 mm and an inner diameter of 6 mm.‎