SMART CUF Milano - Прямоугольный высотный офисный стол

The Smart structure kit consists of two vertical columns formed by three square-section telescopic tubes.‎ Powder-coated in epoxy-polyester.‎ Two electric motors are incorporated in the columns' capitals with two elevation mechanisms and two floor connection brackets.‎ The base is equipped with floor levelling feet.‎ Adjustability 600-1250 mm under the floor.‎ Max.‎ load capacity of structure 100 kg.‎Movement speed 35mm/s.‎ The materials used are as follows: - base foot: upper and lower part in 30/10 mm thick steel plate - columns: 3 pickled steel tubes 70 x 70mm, 65 x 65mm, 60 x 60mm - stabilising feet: Ø 60mm polypropylene The beam kit consists of two fixed beams, available in different sizes for supporting 120-140-160-180 cm tops.‎ The beams are attached to the capitals of the telescopic columns and can also be fixed to the worktop to give greater stability to the entire desk.‎ They are made of 20/10 mm thick epoxy-polyester powder-coated sheet steel.‎ Packaging: single in shrink-wrap.‎ The extension beams hook tangentially to the beams of the main desk.‎ The electrical kit consists of a push-button panel, a control box, the connecting cables and the power cable.‎ The control box coordinates the function of the electric motors inserted in the capitals of the telescopic columns and also manages the 'anti-collision system' that blocks movement in the presence of obstacles under or above the desk.‎ The electric extension kit has coordinated operation for the simultaneous movement of the 3 legs.‎ Push buttons available: - Up&Down - Touch - Display - Bluetooth - Voltage/frequency 230V I 50Hz Packaging: in cardboard box 21 x 21 x 8.‎5 cm.‎ The tops that can be combined with the frames are part of the Centrufficio production in the standard or on-demand finishes of the Doria, Bramante and Fusion lines.‎ Further info from manufacturer on SMART CUF Milano