ATLANTIS - Пластиковый купол и модуль для вентилируемого полупола

Disposable formwork for ventilated – variable height from 56 cm to 300 cm.‎ Atlantis System is an advanced system for creating cavities in general, under-floor cavities and ventilated floors in newly constructed or restructured civil and industrial buildings, accumulation tanks, dispersion tanks, honeycomb rafts, low temperature cold rooms.‎ The Atlantis System is used when the depth of the under-floor cavity or cavity is such that the classic Iglù® formworks cannot be used, with the advantage that the constant diameter of the elevator pipes makes it possible to minimise the use of concrete for filling.‎ The main system features are speed, simplicity and cost performance.‎ Furthermore, with Atlantis, a sanitary space is obtained with a suitable humidity barrier and, if properly ventilated through piping connected outdoors, it is a tool for the disposal of the Radon gas present in the ground.‎ ADVANTAGES - Ease of positioning as it is light-weight and simple to install through the linking of the elements, with time savings up to 80%.‎ - Minimum use of concrete for level filling thanks to the lowered dome form, which permits maximum resistance with minimum slab thickness.‎ - The possibility, due to the pipe system, to have any height up to 3 m supplied to the yard.‎ - Possibility to bear loads of considerable size by providing the pillars with suitable reinforcement.‎ - Adaptable to non-standard spaces as the modules can be cut without underpinning.‎ - Passage of systems under the pavement in all directions: perpendicular and diagonally.‎ - If used in combination with the disposable Muro formwork system it is possible to create elevation plates, both perimetric as well as intermediate, together with the upper slab preventing formwork dismantling, with considerable time savings.‎ - Total ventilation of the space and air flows in all directions.‎ - Simple material management in the yard, as it is not bulky and can be exposed to bad weather.‎ APPLICATIONS Atlantis is a system for creating under-floor cavities where there is considerable height available.‎ It can be used for the distribution of systems and technological networks under the pavement so they do not need to be buried in screed.‎ It is suited for creating thermally insulated cavities for cold rooms with or without forced ventilation.‎ It is the ideal solution for creating accumulation or dispersion tanks and for pool restructuring.‎ Thanks to custom sized elevator pipes, it is the ideal system for creating inclined or multilevel surfaces.‎ Atlantis, when used in combination with the special Muro formwork, represents an innovative, quick and economic solution for the creation of honeycomb or box foundation rafts (superrafts), a reduced use of concrete and steel makes it possible to obtain extreme stiffness even if the ground does not provide much load bearing capacity.‎ CERTIFICATIONS • Technical Construction Certificate issued by the Technical and Test Institute for Constructions Prague (Czech Republic).‎ • Technical Construction Certificate issued by the Agency for Quality Control and Innovation in Building (Hungary).‎ • Hygienic Certificate issued by the National Institute of Hygiene (Poland) • Acoustic check for the verification of DIN standards, Avis Technique issued by the French institute CSTB.‎ • Series of loading and breaking tests certified by the University of Padua.‎ • Member of the Green Building Council Italia UNI EN ISO 14001 (Environment) and SA 8000 (Social responsibility).‎ • Certification of Conformity to the Environmental Compatibility Criteria (CCA).‎ Further info from manufacturer on ATLANTIS Daliform Group