DiBi Porte Blindate VESTA Security shutter

VESTA is the new DI.‎BI.‎ armoured shutter that stands out for its quality and robustness, as well as for its fine workmanship, including anti-noise rubber seals around the entire perimeter of the sashes and the absence of unsightly bottom compensators thanks to the fact that the slats of the shutter are variable pitch and ensure a regular and uniform structure of the sash profiles.‎ VESTA features Entirely made of 20/10 galvanised steel sheet for the frame, 15/10 for the sash profiles and 10/10 for the oval section slats, VESTA is equipped with strong iron hinges well welded to the frame and sashes, with a stainless steel pin and thrust bearing.‎ The security lock has 3 locking points (top, bottom and central bolt) with 18 mm pins and is equipped with the European half cylinder for locking the lock.‎ The semi-fixed sash is equipped with a 2-point lock and, on request, it is possible to have a single key to open the security door and gates in addition to the shutter.‎ Available from 1 to 4 sashes in window and patio door versions with folding or packet opening, VESTA can be mounted with or without a counter frame and in combination with extendable gates.‎ After cataphoresis treatment, the shutter is painted with polyester thermosetting powders.‎ There is a wide range of standard colours: 15 wrinkled Ral colours, 3 marble effect colours and 12 wood effect colours.‎ Patents FOLDINGDEVICE FOR SHUTTERS Folding shutters in packet or folding form.‎ Technical features 1 - 20/10 galvanised sheet metal frame; 2 - Sash profile in 15/10 galvanised sheet metal with groove for anti-noise seal; 3 - Oval section slats in 10/10 galvanised sheet metal.‎ They fit inside the profile and are variable pitch, thus avoiding unsightly compensators; 4 - On both uprights of each sash there is a ø 5mm iron rod passing through each slat that prevents it from slipping out in the event of a break-in 5 - 4 mm galvanised steel hinges with stainless steel pin and thrust bearing adjustable on two axes for 1-leaf and 2-leaf solutions.‎ For all other solutions, 4 mm galvanised steel hinges welded to frame and sashes with stainless steel pin and thrust bearing.‎ 6 - Lock with 3 locking points (top, bottom and central bolt); 7 - European half-cylinder lock with 3/5 reconfigurable keys (1+3 keys for orders up to 5 shutters, 1+5 for orders over 5 shutters); 8 -Latch for sashes with 2 locking points (no on single-sash shutters); 9 - 18 mm locking pins; 10 - Anti-noise gasket on sash perimeter; 11 - Strain relief on hinges and sashes; 12 - Possibility of assembly with and without subframe; 13 - The frame is cataphoresis-treated and painted with polyester thermosetting powders.‎ Security Lock - Armoured security lock (A) consisting of half a European cylinder for locking the lock; - Possibility of a single key for shutter, security door, gate and DibiBlind or Briareo extendable gate (B).‎ Possible sizes and executions A - 1-WING shutter for door - window L.‎ min.‎ 400 - max 800 mm H.‎ min.‎ 1800 - max 2800 mm B - 1-WING shutter for window L.‎ min.‎ 400 - max 800 mm H.‎ min.‎ 800 - max 1790 mm C - 2-WING shutter for door - window L.‎ min.‎ 800 - max 1600 mm H.‎ min.‎ 1800 - max 2800 mm D - 2-WING shutter for window L.‎ min.‎ 800 - max 1600 mm H.‎ min.‎ 800 - max 1790 mm E - 3-WING shutter for door-window L.‎ min.‎ 1200 - max 2000 mm H.‎ min.‎ 1800 - max 2800 mm F - 3-WING shutter for window L.‎ min.‎ 1200 - max 2000 mm H.‎ min.‎ 800 - max 1790 mm G - 4-WING shutter for door-window L.‎ min.‎ 1600 - max 2600 mm H.‎ min.‎ 1800 - max 2800 mm H - 4-WAIL shutter for window L.‎ min.‎ 1600 - max 2600 mm H.‎ min.‎ 800 - max 1790 mm Types of openings for shutters with 1-2 sashes VESTA 1- and 2-sash shutters in addition to the standard opening, right or left, can also have "A" type openings (with standard hinges and an opening of approximately 85°), or "B" type openings (with an opening of 180°).‎ Types of openings for shutters with 3-4 sashes VESTA shutters with 3 and 4 sashes can have either 'A' type openings (with standard hinges and an opening angle of approximately 85°), or 'B' type openings (with an opening angle of 180°).‎ Colour Range RAL COLOURS: White 9010 - Ivory 9001, Ivory 1015 - Green 6005, Green 6009 - Grey 7016, Grey 7035 - Grey 9006, Brown 8003 -, Brown 8017, Brown 8019 - Red 3005, Blue 5003 - Blue 5014, Olive Green 6021 MARBLE EFFECTE.‎M.‎ Green - E.‎M.‎ Brown - E.‎M.‎ Grey WOOD EFFECT:CHERRY-F01-72R - CHERRY-F01-73R, CHERRY-F01-74R - CHERRY-F01-77R, WALNUT-F01-74R -WALNUT-F01-77R, TEK-F01-70R - TEK-F01-72R, TEK-F01-73R - TEK-F01-77R, TEK-F01-377R - TEK-F01-74R Magnetic Defender "The 'Key Protector' is the new magnetic defender for additional cylinder protection.‎ Thanks to an encrypted magnetic 'key' - with more than 6,000 different combinations - to be placed on the defender to open or close it, it is possible to allow or disallow the insertion of the key into the lock.‎ This type of protection makes break-in attempts more difficult and thwarts vandalism.‎ The Key Protector defender is equipped with a secret code card for magnetic key duplication.‎ In addition to shutters, it is also available for armoured doors.‎ Locking Device SUPERBLOCK is the new locking device for the VESTA shutter.‎ It allows three different positions, to be used as required: - semi-open version for when you are at home and want to let in light - neutral version for when you are at home and do not want to let in light - closed version for when you are out of the house or at night SUPERBLOCK provides more security for your shutters without requiring more space than a normal locking device.‎ Further info from manufacturer on VESTA DiBi Porte Blindate