Edil Leca - Вентилируемая панель

The variety of ventilated wall cladding systems with steel supports on traditional masonry led Edil Leca Spa to develop a prefabricated ventilated wall construction system.‎ With a single assembly operation, prefabricated walls made of large-sized reinforced concrete panels with special patented ventilated wall blocks attached can be built with great speed.‎ The panels are produced in both vertical and horizontal versions, and their attachment system to the structure is identical to the attachment systems of traditional panels, so their assembly is also substantially the same.‎ Due to their ease and brevity of assembly, Pannello a parete ventilata panels find intelligent use in achieving architectural effects of rare value as curtain walls on public, commercial residential and tertiary buildings.‎ Dimensions Architectural Ventilated Wall Panels have modular dimensions from 0.‎50 to 3.‎00 metres on one side and up to 12.‎00 metres on the longest side.‎ Advantages The main advantages of Architectural Ventilated Wall Panels are: Ventilated wall cladding and cladding in a single solution Surfaces and workmanship of the cladding equal to natural stone Numerous shades with coloured grits Cost-effectiveness compared to classic solutions Surfaces and colours Thesurfaces of the ventilated wall blocks, honed matt or polished, bush-hammered, striated, take on a "Granite" or "Stone" look in the colours and shades shown in the table and are an inexhaustible source of creativity for the designer.‎ The colouring created in the concrete mass with the use of white or grey cement, inorganic oxides and coloured grits remains unaltered over time, while the concrete of the blocks, very compact and water-repellent in the mass, has very low water absorption values due to imbibition and capillarity, which prevents the penetration of rainwater and allows it to resist freezing and thawing, ensuring durability over time.‎ It is also possible to achieve special polishing or antiqued effects.‎ The lateral edges of each individual block are also ground with tolerances of ±1.‎5 mm and bevelled edges in the size required by the customer.‎