Ediltec POLIISO® TEGOLA

POLIISO® TEGOLA is a yellow structural, load-bearing panel for thermal insulation below tile made of rigid, closed-cell PIR, expanded between two embossed aluminum supports.‎ The panels with 4 shiplap edges have nominal λDvalues of 0,022 W/mK according to European standard EN 13165 and compressive strength values of  ≥150 kPa; they are 2400 mm long and as wide as the tile pitch; thicknesses range from 60 to 120 mm.‎ The panels have a fire classification of EUROCLASS E according to European standard EN 13501-1; a tile-bearing metal profile inserted along their length makes them fit for load-bearing.‎ They have holes to favor micro-ventilation under the covering layer.‎ APPLICATIONS WITH POLIISO® TEGOLA: microventialted sloped roof below tiles.‎ POLIISO® are Polyiso foam (PIR) panels produced with ozone-friendly blowing agents and without the use of CFCs and HCFCs.‎ The foam is rigid, closed-cell, rot-proof and resistant to most chemical additives and high temperatures (up to 110 °C).‎ The panels, available with different surface finishes, are among the best thermal insulators on the market, declaring a thermal conductivity value of λD, up to 0.‎022 W/mK according to European standard EN 13165.‎ Some types of panels, being clad in aluminium, allow for total refraction of ultraviolet rays of sunlight on the roof, further increasing the thermal performance of the panels and, on the wall, they constitute an excellent vapour barrier.‎ POLIISO® is particularly suitable for thermal insulation in hot roofs, cavities, etc.‎ Further info from manufacturer on POLIISO® TEGOLA Ediltec