Ediltec POLIISO® PLUS - Плита теплоизоляционная из полиуретановой пены

POLIISO® PLUS is a yellow thermal insulation panel made of rigid, closed-cell PIR foam, expanded between two aluminum foil supports.‎ The panels declares λD values of 0,022 W/mK according to European standard EN 13165, compressive strength values ≥ 150 kPa and come in a standard size of 600 x 1200 mm.‎ The panels are available in thicknesses of 20 - 140 mm.‎ APPLICATIONS WITH POLIISO® PLUS: hot roof below synthetic membrane,cavity wall insulation; floor, heated floor systems.‎ POLIISO® are Polyiso foam (PIR) panels produced with ozone-friendly blowing agents and without the use of CFCs and HCFCs.‎ The foam is rigid, closed-cell, rot-proof and resistant to most chemical additives and high temperatures (up to 110 °C).‎ The panels, available with different surface finishes, are among the best thermal insulators on the market, declaring a thermal conductivity value of λD, up to 0.‎022 W/mK according to European standard EN 13165.‎ Some types of panels, being clad in aluminium, allow for total refraction of ultraviolet rays of sunlight on the roof, further increasing the thermal performance of the panels and, on the wall, they constitute an excellent vapour barrier.‎ POLIISO® is particularly suitable for thermal insulation in hot roofs, cavities, etc.‎ Further info from manufacturer on POLIISO® PLUS Ediltec