Ediltec POLIISO® SB HD - Панель теплоизоляционная из полиуретановой пены

POLIISO® SB HD is a yellow thermal insulation panel made of rigid, closed-cell PIR foam, expanded between two supports: the top one is made of bituminized glass fiber and the bottom one of saturated mineralized glass fiber.‎ "HD" is the abbreviation of  "High Density", therefore the Compressive Strength is ≥ 200 kPa.‎ The panels declares λD values from 0,025 W/mK or 0,028 W/mK (depending on thickness) according to European standard EN 13165, they are fit for applications below membrane by flaming with maximum operating temperatures of up to 110 °C and come in a standard size of 600 x 1200 mm.‎ The panels are available in thicknesses of 30 - 160 mm.‎ APPLICATIONS WITH POLIISO® SB HD : Hot roof below bituminous membrane; ventilated sloped roof insulation under bituminous membrane; hot garden roof.‎ POLIISO® are Polyiso foam (PIR) panels produced with ozone-friendly blowing agents and without the use of CFCs and HCFCs.‎ The foam is rigid, closed-cell, rot-proof and resistant to most chemical additives and high temperatures (up to 110 °C).‎ The panels, available with different surface finishes, are among the best thermal insulators on the market, declaring a thermal conductivity value of λD, up to 0.‎022 W/mK according to European standard EN 13165.‎ Some types of panels, being clad in aluminium, allow for total refraction of ultraviolet rays of sunlight on the roof, further increasing the thermal performance of the panels and, on the wall, they constitute an excellent vapour barrier.‎ POLIISO® is particularly suitable for thermal insulation in hot roofs, cavities, etc.‎ Further info from manufacturer on POLIISO® SB HD Ediltec