FILA Solutions ES82

FILAES82 Solvent-based water-repellent anti-efflorescence protector What It’s For Prevents water absorption.‎  Creates a barrier against efflorescence.‎  Helps ensure uniform absorption of products used in subsequent treatment steps.‎  Excellent for protecting exterior brick walls.‎  Natural effect allowing the material to breathe.‎ Advantages Does not change the natural colour of materials.‎  Excellent for use internally and externally.‎  Prevents moss formation.‎  Does not alter terracotta frost resistance.‎  Allows surfaces to breathe.‎  High penetration capacity.‎ Materials to be treated Terracotta Quarry tiles Brick walls Packaging 1-litre cans in boxes of 12.‎  5-litre cans in boxes of 4.‎  TECHNICAL DETAILS HOW TO USE IT No dilution required: ready to use.‎  Application:  1.‎Clean the surface with Deterdek or FilaPhZero and rinse thoroughly.‎  2.‎Once the surface is dry and clean (after 7-15 days for terracotta) apply the product with a flat brush, evenly and generously, soaking the tile joints thoroughly as well.‎  External surfaces: apply a second coat of FilaES82 or one coat FilaFob 24 hours after the first.‎ FilaES82 can also be sprayed on using an airless pump.‎ For indoor terracotta floors we recommend finishing the treatment with the Fila method, by applying paste wax FILANATURWAX and a liquid wax chosen from the Fila range.‎  Maintenance: diluted solution of FilaCleaner.‎ Caution:  Carry out a patch test on a small surface area to check for any changes in colour.‎  Do not apply the product externally if rain is forecast.‎ WARNINGS  • Keep out of reach of children.‎  • Do not disperse into the environment after use.‎  • If used indoors, it is advisable to ventilate the area well.‎  • The use of a single-disc cleaning machine is permitted only if it is perfectly undamaged.‎  Outdoor flooring must be properly laid before being treated and must satisfy all specific requirements, including: adequate sloping, properly executed expansion joints, perfect insulation from underlying ground, proven compatibility with sub-zero temperatures.‎  TEMPERATURES  Storage temperature: from 0° to 30°C  The product should be applied to materials with temperature between 5° and 30° C.‎  COMPOSITION  A mixture of siloxane compounds dispersed in de-aromatised hydrocarbon solvent.‎ Further info from manufacturer on ES82 FILA Solutions