FILA Solutions FASEZERO

FASEZERO is the concentrated preparatory remover.‎ What it is used for - Removes excess non-filmic waterproofing agents, even in case of incorrect application.‎ - Recommended to prepare surfaces for the SALVATERRAZZA® and SALVATERRAZZA® ECO treatment, degreasing and removing stubborn dirt.‎ Theadvantages: - Contains biodegradable ingredients - High performance - Safe result - Fast action - Intense cleaning action - VOC free - Improves the absorption of SALVATERRAZZA® and SALVATERRAZZA® ECO.‎ How to use: Dilution: Depending on use.‎ Application instructions: To prepare heavily soiled surfaces, prior to application of protective treatments such as hydro- and oil-repellent non-film-repellent: pre-wet the surface with water.‎ Dilute 1:5, spread and leave to act for 2-3 minutes.‎ Intervene with a scrubbing brush, single brush or abrasive sponge.‎ Collect the solution with a vacuum cleaner or cloth and rinse thoroughly with water.‎ For more vigorous cleaning dilute 1:3.‎On a dry and clean surface, proceed with the application of the chosen protective treatment.‎ SALVATERRAZZA® and SALVATERRAZZA® ECO is recommended to prepare the surfaces for SALVATERRAZZA® and SALVATERRAZZA® ECO treatment.‎ In case of incorrect application of water-repellent, oil-repellent, non-film-repellent treatments or to remove excess SALVATERRAZZA® and SALVATERRAZZA® ECO: apply the undiluted product directly on the surface with a brush.‎ After approx.‎ 15 minutes, scrub with a scrubbing brush or single brush and rinse thoroughly with water.‎ In the case of tenacious treatments, repeat the application.‎ TOOL CLEANING: clean with water immediately after use.‎ Packaging 1 litre: cartons of 12 pieces.‎ 5 litres: cartons of 4 pieces.‎