FILA SALVADOCCIA

FILA SALVADOCCIA is the anti infiltration eco for showers.‎ What it does - Stops infiltration by protecting cracks and crevices up to 1 mm - Hinders the development of mold, algae and blackening - Prevents water absorption, preventing the appearance of efflorescence (salts) from joints - Slows down the aging of the shower environment, keeping it healthy and clean over time - Simplifies shower maintenance - Provides anti-dust protection Advantages - Does not create surface film and allows the material to breathe.‎ - Easy to use because it is ready to use.‎ - Does not yellow under any environmental and aging conditions - Has a high yield - VOC free product with low environmental impact with Indoor Air Comfort Gold certificate.‎ Application materials Cementitious joint Porcelain stoneware Ceramic Mosaic Tuff Natural stone Agglomerates Reconstructed stone Cement How to use Ready to use: no need to dilute.‎ Application On a clean, dry surface, apply evenly with a brush or other applicator over the entire surface of FILA SALVADOCCIA without thinning, soaking the joints well.‎ Before the product dries, remove any residue from the tiles with a clean cloth.‎ HIGH yield formula: abounding in application causes surface residue to form.‎ Dries in 4 hours and shower can be used the day after application.‎ Preliminary cleaning of the surface (check the compatibility of the detergent with the coating material): DETERDEK PRO/EASYDEK to remove limestone PS87 PRO / ENERGYCLEAN for organic dirt, soaps and general grease ACTIVE 1 for mold and blackening.‎ Maintenance: use CLEAN&SHINE for routine cleaning.‎ For deeper cleaning use DEEPCLEAN (on acid-resistant materials).‎ Yield With 375 mL of product I make: up to 400 linear m or 12 m2  Yields are approximate and are per coat.‎