HYDROREP ECO - Водоотталкивающая краска на водной основе

HYDROREP ECO is an eco-compatible water-repellent protection.‎ What it's for • Water repellent with natural effect.‎ • Deeply penetrates the material while allowing the surface to breathe.‎ • Hampers the build-up of algae, moulds and lichen.‎ • Protects the surface against deterioration caused by weathering.‎ Advantages • Anti-fouling barrier certified by tests conducted in conformity to the UNI EN ISO 846: 1999 method.‎ • Ideal for protecting external walls.‎ • Resists UV radiation.‎ • Does not alter terracotta frost resistance.‎ • It protects against efflorescence.‎ • Can be applied to surfaces with residual humidity: drastically reduced application times.‎ • The treatment preserves the material’s level of breathability above 90%.‎ How to use it No dilution required: ready to use.‎ Application: Make sure that the surface is dry and clean, then apply the product by impregnating the material until it is saturated, using a brush or other application method.‎ Dab any excess product with a clean cloth before it dries (roughly 10-15 minutes).‎ The surface can be walked on after 4 hours.‎ The water-repellent effect starts after 24 hours.‎ FOR PROFESSIONAL USE ONLY: spray the product (airless system) on vertical surfaces until they are saturated and use appropriate PPE, as specified in the safety information sheet.‎ Coverage APPROXIMATE COVERAGE (1 litre): Terracotta, exposed brick walls, quarry tiles, stone, plaster 10/20 m² Concrete 8-10 m² “Coverage shown is for guidance purposes only and refers to single coats” Packaging 1 litre: boxes of 12.‎ 5 litres: boxes of 4.‎ Further info from manufacturer on HYDROREP ECO FILA Solutions