FILA Solutions W68 - Защитное средство от пятен

W68 is a water-based stain protector for unpolished surfaces.‎ What It’s For • Seals and protects porous materials such as rough-finish natural stone, terracotta and concrete from oily dirt.‎ • Stain-proofing: it hampers the absorption of common watery and oily stains.‎ • Suitable for interior and exterior surfaces.‎ • For use on interior floors as a protective base-coat before the application of wax.‎ • It provides an anti-graffiti protection that prevents graffiti paint from bonding to surfaces.‎ It speeds the cleaning process because graffiti can be easily removed.‎ Advantages • Natural effect: does not alter the surface’s original appearance.‎ • A water-based product free of hydrocarbon solvents, which makes the product more environment-friendly and drastically reduces the treatment times as it can be applied to surfaces with residual humidity.‎ • Does not form surface film.‎ • Does not alter terracotta frost resistance.‎ • Excellent also for concrete surfaces.‎ • The treated surfaces are suitable for food contact.‎ • This product has extremely low VOC emissions: certified by GEV and marked by EC1Plus and helps towards gaining credits for the LEED.‎ Materials to be treated Terracotta Quarry tiles Concrete Unpolished stone and agglomerates Packaging 1 litre: boxes of 12.‎ 5 litres: boxes of 4.‎ HOW TO USE IT No dilution required: ready to use.‎ Indoor surfaces in terracotta and untreated stone: On a clean and dry surface, apply one coat of FilaW68, evenly, using a paintbrush or fleece pad, also soaking the joints well.‎ Wait 4 hours, then apply a coat of FILAJET.‎ Wait at least an hour, then apply a coat of the specific finishing wax for the effect desired (FILAMATT: natural; FILASATIN: satin; FILACLASSIC and FILALONGLIFE: glossy).‎ Internal surfaces in terracotta and polished stone.‎ On a clean and dry surface, apply one coat of FILAW68, evenly, using a paintbrush or fleece pad, also soaking the joints well.‎ Wait 4 hours and then, apply a coat of FILAJET and following with the deisired wax (FILAMTT: natural; FILASATIN: satin; FILACLASSIC and FILALONGLIFE: glossy).‎ Outdoor surfaces in terracotta, stone and concrete: On a clean surface, apply 2 coats of FILAW68 evenly, using a paintbrush or fleece pad, also soaking the joints well.‎ Maintenance: diluted solution of FILACLEANER Caution: Carry out a patch test on a small surface area to check for any changes in colour.‎ Do not apply the product externally if rain is forecast.‎ WARNINGS • Keep out of reach of children.‎ • Do not disperse into the environment after use.‎ • Protect can from frost.‎ Store at room temperature.‎ Outdoor flooring must be properly laid before being treated and must satisfy all the specific requirements, including: adequate sloping, properly executed expansion joints, perfect isolation from the underlying ground, proven compatibility with sub-zero temperatures.‎ It does not protect marble and limestone from acid.‎ TEMPERATURES Storage temperature: from 5° to 30° C The product must be applied to material with a temperature of between 10° and 30°C.‎ COMPOSITION Water suspension of organic resins.‎ Further info from manufacturer on W68 FILA Solutions