WET ECO - Защитное средство с эффектом влажности

Wet Eco is a wet-effect toning protectant.‎ What it is used for - Wet-effect stain- and dirt-repellent protectant for surfaces of unpolished natural stone, unpolished agglomerates and terracotta - Prevents the absorption of stains and facilitates the removal of dirt - Is particularly suitable for exteriors and also suitable for interiors - Prevents dusting of the surface Advantages - Environmentally friendly treatment: water-based - High resistance to heavy traffic - Resistant to weathering - Does not peel or yellow - Facilitates subsequent maintenance - Does not alter the frostiness of cotto (UNI EN ISO 10545-12) - Plant-based product: developed with raw materials of organic origin and renewable resources - VOC free product with low environmental impact with indoor air comfort gold certificate Application materials - Unpolished natural stones - Unpolished agglomerates - Cotto How to use No dilution: ready to use.‎ Application Shake before use.‎ On a dry and clean surface, apply WET ECO with a brush or fleece evenly over the surface, impregnating the joints well as well.‎ After 2-3 hours, apply a second coat following the same procedure.‎ Wait at least 12 hours before walking on the surface.‎ Maintenance: diluted solution of CLEANER PRO.‎ Yield The following surfaces can be covered with one liter of product: Unpolished stones and agglomerates - 10/20 m² Cotto - 7/20 m² Yields are indicative and are per coat.‎ Further info from manufacturer on WET ECO FILA Solutions