FritsJurgens - Система M+

System M+ takes the System M pivot hinge range to a new level.‎ This adjustable pivot hinge brings Latch Control to ensure proper latching, guaranteed control over the movement of doors up to 500 kg, and extra adjustability for the movement of the door.‎ System M+, like System M, is equipped with FlowMotion technology which creates and controls the movement of the pivot door.‎ System M and System M+ - Hold positions at 0°, 90° and -90° - Damper Control System M+ - 30° Speed Control - Latch Control - Guaranteed control over the movement from 20 to 500 kg LATCH CONTROL AND 30° SPEED CONTROL FritsJurgens’ adjustable pivot hinge System M+ introduces Latch Control and 30° Speed Control.‎ Latch Control enables the door to accelerate in the last 10° of the movement of the door to ensure proper latching of the door.‎ This is especially useful in exterior pivot doors.‎ 30° Speed Control allows you to fine-tune the speed of the pivot door through the last 30° of the closing movement.‎ This helps you to define the closing movement of the door, no matter the weight.‎ Control from 20 kg to 500 kg.‎ System M’s best features can also be found in System M+: Damper Control, FlowMotion technology, hold positions at 0°, 90° and -90° and suitability for double- and single acting doors.‎ LATCH CONTROL Provides the ability to adjust the pivot hinge to latch the door properly.‎ DAMPER CONTROL Ensures a smooth and elegant closing movement and protects your door from touching the wall (back-check).‎ 30º SPEED CONTROL Allows you to determine the speed of the pivot door through the last part of the closing movement.‎ A pivot door needs various components:  - Top pivot: The top pivot is mounted into the top of the door.‎ It uses a so-called pinhole connection, in which the pin is fixed to the top pivot and goes into the hole in the ceiling plate when the door is placed.‎ - Top pivot Regular - Top pivot Cable Grommet - Suitable for: System One, System 3, System M, System M+: Designed to easily pull cables through the top pivot - Top pivot 70 mm - Suitable for: System One, System 3, System M, System M+: All-rounder: suitable for almost every pivot door and situation - Top pivot 40 mm - Suitable for: System M, System M+: Ideal for construction and renovation with standard widths - Bottom pivot: The bottom pivot is the pivot mechanism and driver of the pivot door and is fitted in the bottom side of the door.‎ The pivot mechanism therefore is virtually invisible.‎ FritsJurgens bottom pivots have a load bearing capacity for pivot doors up to 500 Kg.‎ The bottom pivot offers several features, depending on the choice of bottom pivot, such as: hold positions, self-closing, damper control, latch control, 30° speed control, free swing.‎ The bottom pivots placement determines the the spatial impact that thepivot door will have on its surroundings.‎ Besides a more regular side placement to create pivot doors, FritsJurgens pivot hinges are also suitable for 360 degree rotating panels or walls.‎ - Ceiling plate: The ceiling plate is fitted in the ceiling, where the pin of the top pivot seamlessly fits into the hole in the ceiling plate.‎ The ceiling plate is available in two finishes: brushed stainless steel and black.‎ - Floor plate: Every FritsJurgens floor plate is mounted 8 mm in the floor.‎ This is sufficient for almost every floor type and makes it possible to combine FritsJurgens’ hinges with floor heating.‎ Two longer, shortenable floor plate pins of 30 mm are included with the square floor plate designs.‎ There are various floor plates available for System M+.‎ The standard floor plate is available in four designs: brushed stainless steel (Series 420) and PVD black in a round and a square version.‎ Also available is floor plate Flush, which can be integrated into thresholds and into interior floors.‎ The floor plates by FritsJurgens are made of solid tempered steel and, therefore, entirely scratch resistant.‎