SYSTEM ONE - Поворотная петля

System One is FritsJurgens’ most compact and narrow pivot hinge – a single pivot point, offering a free-swing pivot door for doors with slim door frames.‎  Compact and slim System One acts as a single pivot point without hold positions or self-closing features.‎ It is a simple, slim and narrow, yet broadly applicable pivot hinge.‎ Free swing The simplicity of System One allows for free swing pivot doors that can easily be combined with door frames.‎ Single- and double acting doors System One’s free rotation means that this pivot hinge can be applied in both single- and double-acting pivot doors.‎ SYSTEM ONE The new System One is only 18 mm high, much slimmer than the previous One.‎ It is available in two versions: the regular System One 70 mm, and System One 40 mm.‎  System One 70 mm has a pivot point from 70 mm from the side of the door to the middle placement.‎ System One 40 mm can be combined with Top pivot 40 mm and has a fixed pivot point of 40 mm from the side of the door.‎ Internally, these products are the same.‎  Two cover plates are available for System One 40 mm, just like for System M and M+ 40 mm.‎ These are also available in the same colors: stainless steel and black.‎   The new One has, like the old One, a load-bearing capacity of up to five hundred kilograms.‎ This new system can be used for every solution that the old One could.‎ And, combined with Top pivot Reversed, it is now possible to create extremely thin door frames.‎ Floor plate squared NA  The new System One also has a new interface.‎ It is not actually new: the new System One has the same interface that System M and M+ already have.‎ A new spindle for the One also means a new floor plate.‎ This is Floor plate NA: floor plate non-adjustable.‎ System One doesn’t have any additional features, so this floor plate does not need an adjustable floor plate, like System M+ and M.‎  This floor plate is available in one finish, brushed stainless steel 316, and has brass floor plate pins as you’re used to.‎  This new floor plate creates more uniformity with the System M range, fits the overall product design better, and reduces the gap between the door and the floor plate.‎ The old System One had a 13 millimeters gap under the door.‎ With this new floor plate, this gap is reduced to 11 millimeters.‎  Top pivot Reversed, or TP-R A product you might already know: Top pivot Reversed is placed inside the top jamb or ceiling.‎ The pivot point can range from 130 millimeters to middle placement.‎ This is without adapters, which you need when you apply TP-R in aluminum or steel frames.‎ This system is adjustable from the ceiling or top jamb instead of the door’s side.‎ You don’t need to drill holes in the side of your door or use a Hexagon Guide.‎  TP-R has a 15 mm pin.‎ This means there’s no differentiation between a 10 mm and a 15 mm version, as with TP-40 and TP-70.‎ This is one product for all weight classes.‎ Because the product is in the ceiling, you can opt for very thin door frames, especially when you combine TP-R with the new System One.‎ TP-R is compatible with every FritsJurgens pivot hinge.‎  A pivot door needs various components:  - Top pivot: The top pivot is mounted into the top of the door.‎ It uses a so-called pinhole connection, in which the pin is fixed to the top pivot and goes into the hole in the ceiling plate when the door is placed.‎ - Top pivot Regular - Top pivot Cable Grommet - Suitable for: System One, System 3, System M, System M+: Designed to easily pull cables through the top pivot - Top pivot 70 mm - Suitable for: System One, System 3, System M, System M+: All-rounder: suitable for almost every pivot door and situation - Top pivot 40 mm - Suitable for: System M, System M+: Ideal for construction and renovation with standard widths - Bottom pivot: The bottom pivot is the pivot mechanism and driver of the pivot door and is fitted in the bottom side of the door.‎ The pivot mechanism therefore is virtually invisible.‎ FritsJurgens bottom pivots have a load bearing capacity for pivot doors up to 500 Kg.‎ The bottom pivot offers several features, depending on the choice of bottom pivot, such as: hold positions, self-closing, damper control, latch control, 30° speed control, free swing.‎ The bottom pivots placement determines the the spatial impact that thepivot door will have on its surroundings.‎ Besides a more regular side placement to create pivot doors, FritsJurgens pivot hinges are also suitable for 360 degree rotating panels or walls.‎ - Ceiling plate: The ceiling plate is fitted in the ceiling, where the pin of the top pivot seamlessly fits into the hole in the ceiling plate.‎ The ceiling plate is available in two finishes: brushed stainless steel and black.‎ - Floor plate: Every FritsJurgens floor plate is mounted 8 mm in the floor.‎ This is sufficient for almost every floor type and makes it possible to combine FritsJurgens’ hinges with floor heating.‎ Two longer, shortenable floor plate pins of 30 mm are included with the square floor plate designs.‎ There are various floor plates available for System M+.‎ The standard floor plate is available in four designs: brushed stainless steel (Series 420) and PVD black in a round and a square version.‎ Also available is floor plate Flush, which can be integrated into thresholds and into interior floors.‎ The floor plates by FritsJurgens are made of solid tempered steel and, therefore, entirely scratch resistant.‎