GEOSEC® - Стабилизация почвы

SOIL STABILIZATION, dedicated to the compaction and consolidation of the sub-base of non-load-bearing floors and walls, exploits the injection of GEOSEC® synthetic resin, introduced into the soil/substrate interface; the resin, injected in liquid under slight pressure, will fill all the underlying voids and subsequently, expanding following a chemical reaction, will produce an effective compaction and consolidation action of the sub-base.‎ Once the caved or depressed area has been identified, a series of small holes are drilled through the paving package with a diameter of between 8 and 30 mm, and special metal pipes are then introduced into these holes to facilitate the placement of the liquid resin, estimated in quantity according to presumed consumption.‎ In the meantime, on the surface, at the same time as the injection, passive monitoring is carried out by means of simple levels and/or precision sensors.‎ Expected results: - Stabilisation of the subsurface subsurface that has given way; - Filling and compaction of the voids; - Possible raising of the pavement/wall - where the structure that has given way allows it; - Reactivation of the foundation structure against the ground and redistribution of the stresses induced in the ground; - Partial isolation of the structure against the ground.‎ CONSOLIDATION AND STABILIZATION OF RESIDENTIAL FLOORS The SOIL STABILIZATION™ method, used to consolidate residential floors (indoors, outdoors, swimming pools, etc.‎), is dedicated to compacting the subgrade underneath the parts of the structure that have been depressed; injections of expanding resin are carried out to consolidate the subgrade and raise, when possible, the caved-in flooring, thus restoring its original flatness.‎ CONSOLIDATION OF RIGID INDUSTRIAL FLOORS SOIL STABILIZATION™ is GEOSEC®'s fast and mini-invasive solution for consolidating industrial floors, ideal for improving or maintaining the load-bearing capacity of floor subfloors.‎ The method allows you to intervene quickly, economically, without having to move or dismantle heavy equipment, machinery and silos, thus avoiding interrupting your company's normal working activities.‎ With SOIL STABILIZATION™ it will no longer be necessary to install invasive, long and complex worksites; there will be no need for excavations and demolitions, everything will be done quickly, sometimes in just a few hours, with cleanliness and extreme precision, minimising costs and inconvenience.‎ In addition, where possible, the industrial pavements that have collapsed can be raised, thus restoring the original flatness.‎ INNOVATIVE SOLUTION FOR RAPID ROADWAY PAVEMENT MAINTENANCE SOIL STABILIZATION™ is the GEOSEC® method for consolidating flexible or semi-rigid road pavements.‎ Often a cracked and depressed wearing course is only the ultimate manifestation of a bearing capacity problem of the foundation layer and its subgrade, which no longer guarantee an adequate level of safety and economic viability of the infrastructure.‎ The SOIL STABILIZATION™ method is the modern solution for fast, mini-invasive maintenance to improve the compaction of the subgrade underneath the depressed road pavement, reducing voids and ensuring better bonding action of the materials.‎ INNOVATIVE SOLUTION FOR QUICK MAINTENANCE OF AIRPORT PAVINGS SOIL STABILIZATION™ is GEOSEC®'s mini-invasive solution for quick and effective rehabilitation of foundations and sub-bases of rigid, semi-rigid and flexible airport pavements for taxiways and aircraft taxiways.‎ The method makes it possible to easily intervene both to eliminate disruptions, due to differential failures caused by low bearing capacity or wear, and for the eventual lifting of the rigid structures that have failed, with restoration of the original flatness.‎ SOIL STABILIZATION™ is the ideal application for quick and targeted maintenance plans and for improving the bearing capacity of airport pavements.‎ In addition, it is characterised by an advantageous site versatility that allows for rapid intervention without the need for excavation, demolition and traditional site preparation.‎