GM MORANDO GIEMME SYSTEM® - Giemme Business Folding frameless glass facade

GIEMME SYSTEM ® is a patented folding glass glazing system designed to close off balconies, terraces, porches and verandas.‎ Thanks to the absence of uprights between one sash and the other ("all-glass" system), GIEMME SYSTEM® brings brightness and elegance to rooms and allows the viewer to observe the outside through an uninterrupted, transparent wall.‎ Airtightness is guaranteed by transparent polycarbonate gaskets between the sashes and by a system of EPDM and polypropylene fibre gaskets on all four sides.‎ An ideal closure for restaurants, bars and hotels with porches or open spaces that, thanks to GIEMME SYSTEM® glazing, have the possibility of obtaining totally flexible environments.‎ In fact, the closure of the doors allows the exploitation even in the winter months of those spaces that were previously only usable during the warm season, and creates a true glass wall without any solution of continuity.‎ An ideal system for shops, because it achieves that necessary direct contact between buyer and seller, putting an end to the barrier between inside and outside.‎ It becomes an irresistible invitation to look, to desire and to buy.‎ A wide range of accessories is available to allow you to create entrances equipped with handles, locks, pull handles and door closers as required.‎ The aluminium parts are available in different colours and finishes.‎ The glass can be transparent, coloured, acid-etched or screen-printed; an eye-catching photo or logo allows the glazing to be used as an advertising space.‎ THE SYSTEM FEATURES The mobile glazing is designed and built with materials that have been studied and tested in their systems, all to the benefit of quality and functionality.‎ The supporting structure is made of anodised (20 µm) or polyester powder-coated aluminium.‎ The 10 mm toughened glass doors with polished edges slide on the upper track with special Delrin® bearings, ensuring easy handling and sliding.‎ The screws and pivots are in stainless steel.‎ All this guarantees excellent quality and freedom from maintenance.‎ DIMENSIONS GIEMME SYSTEM® walls can be built to surround spaces of all types and sizes.‎ There are no limits in the horizontal direction.‎ The binding parameter is the height, which cannot exceed 2900 mm.‎ The maximum width of a single sash is 700/800 mm, depending on the height of the glazing.‎ If necessary, a fixed or folding fanlight can be made, framed or made entirely of glass.‎ ATMOSPHERIC TIGHTNESS AND PERFORMANCE Maximum tightness is guaranteed by transparent polycarbonate gaskets between the sashes and on the sides, and by EPDM and polypropylene fibre gaskets on the upper and lower sides.‎ When the glazing remains closed, the transparent U-shaped polycarbonate gaskets, placed between the sashes, fit perfectly with the glass, creating a very transparent wall and giving solidity to the entire structure.‎ GIEMME SYSTEM® products are tested by notified laboratories and comply with the regulations in force (UNI EN 14351-1: air permeability, water tightness, wind load resistance, impact resistance).‎ PACKING The practical and light sliding system allows the glazing to be opened completely in just a few moments.‎ The size of the packaged sashes is approximately 5 cm for each sash.‎ REALIZATION WITH OR WITHOUT GUIDE GIEMME SYSTEM® glazing can also be made without a floor guide up to a maximum of 4 sashes.‎ By packing the glazing on both sides, it is possible to cover approximately 6 metres without a floor guide.‎ With the use of the floor guide, there are no limits to the horizontal construction.‎ Various types of floor guides are available, depending on the client's requirements: - Recessed floor guide: used in frequently passing situations, as it does not constitute an obstacle - External floor guide: suitable for installation on parapets and terraces - External floor guide with rebate: guarantees maximum tightness, thanks to the gaskets acting as a rebate between the guide and the lower aluminium strips.‎ IMPLEMENTATION PARTICLES - Removable hinges: hinge system with removable pivots, allowing easy cleaning of the outside of glazing units on balconies - "Corner-curve" system: allows the sashes to slide beyond the corners, leaving them free of clutter.‎ - All-glass" corner: corner realisation without uprights with magnetic gasket.‎ ACCESSORIES A range of accessories can be applied to each realisation, such as locks, handles, door closers, to create entrances and hinged sashes to be inserted inside the glazing.‎ FINISHES It is possible to choose aluminium parts in different finishes, depending on one's needs: anodised, painted in the various RAL colours, marbled colours, wood effect.‎ The glass is available in the following variants: transparent, extra-clear, coloured, smoked, bronzed, acid-etched and even screen-printed with customised decoration.‎ MAINTENANCE The materials of which the glazing is made, aluminium, toughened glass and stainless steel accessories, due to their intrinsic characteristics do not require maintenance.‎ It only needs to be cleaned from time to time.‎