GM MORANDO GIEMME SYSTEM® - Giemme Home Folding frameless aluminium glass facade

GIEMMESYSTEM® - Giemme Home is a folding glazing system ideal for verandas, balconies and conservatories that offers a flexible yet effective solution against atmospheric agents, with the possibility of total or partial closure, depending on requirements, with minimal encumbrance of the packaged sashes.‎ GIEMME SYSTEM® is particularly suitable for closing porches, thanks to its "curve-corner" system that allows the sashes to slide past corners, leaving them free of encumbrances.‎ A system of detachable hinges has been devised for closing off terraces, making it possible to clean the exterior parts while remaining comfortably inside.‎ Its side-packet opening offers the possibility of creating an interior environment in contact with nature in the summer months; its total closure in the winter months creates a very transparent and elegant "all-glass" façade (thanks to the absence of uprights) that allows you to contemplate external views sheltered from the weather.‎ Transparent polycarbonate gaskets between the sashes and a system of EPDM and polypropylene fibre gaskets on all four sides guarantee protection against atmospheric agents.‎ GIEMME SYSTEM® glazing can be fully customised in the choice of aluminium and glass finishes to better suit the architectural characteristics of each home.‎ Accessories such as locks and handles make it possible to insert sashes in the glazing with an entrance function in their own right, or attached to the others so that they can be packaged in turn.‎ THE SYSTEM FEATURES The mobile glazing is designed and built with materials that have been studied and tested in their systems, all to the benefit of quality and functionality.‎ The supporting structure is made of anodised aluminium (20 µm) or polyester powder coated.‎ The 10 mm toughened glass doors with polished edges slide on the upper track with special Delrin® bearings, ensuring easy handling and sliding.‎ The screws and pivots are in stainless steel.‎ All this guarantees excellent quality and maintenance-free operation.‎ DIMENSIONS GIEMME SYSTEM® walls can be built to surround spaces of all types and sizes.‎ There are no limits in the horizontal direction.‎ The binding parameter is the height, which cannot exceed 2900 mm.‎ The maximum width of a single sash is 700/800 mm, depending on the height of the glazing.‎ If necessary, a fixed or opening fanlight can be realised with wasistas, framed or completely made of glass.‎ ATMOSPHERIC TIGHTNESS AND PERFORMANCE Maximum tightness is guaranteed by transparent polycarbonate gaskets between the sashes and on the sides, and by EPDM and polypropylene fibre gaskets on the upper and lower sides.‎ When the glazing remains closed, the transparent U-shaped polycarbonate gaskets, placed between the sashes, fit perfectly with the glass, creating a very transparent wall and giving solidity to the entire structure.‎ GIEMME SYSTEM® products are tested by notified laboratories and comply with the regulations in force (UNI EN 14351-1: air permeability, water tightness, wind load resistance, impact resistance) PACKAGING The practical and light sliding system allows the glazing to be opened completely in just a few moments.‎ The size of the packaged sashes is approximately 5 cm for each sash.‎ REALIZATION WITH OR WITHOUT GUIDE GIEMME SYSTEM® glazing can also be made without a floor guide up to a maximum of 4 sashes.‎ By packing the glazing on both sides, it is possible to cover approximately 6 metres without a floor guide.‎ With the use of the floor guide, there are no limits to horizontal construction.‎ Various types of floor guides are available, depending on the client's requirements: - Recessed floor guide: used in frequently passing situations, as it does not constitute an obstacle - External floor guide: suitable for installation on parapets and terraces - External floor guide with rebate guarantees maximum tightness, thanks to the gaskets with rebate function between the rail and the lower aluminium strips PARTICULAR IMPLEMENTATIONS - Removable hinges: hinge system with removable pins, allowing easy cleaning of the outside of glazing placed on balconies - "Corner-corner" system: allows the sashes to slide past corners, leaving them free of clutter - All-glass" corner: corner realisation without uprights with magnetic gasket.‎ ACCESSORIES A range of accessories can be applied to each realisation, such as locks, handles, door closers, to create entrances and hinged sashes to be inserted inside the glazing.‎ FINISHINGS It is possible to choose aluminium parts in different finishes, depending on one's needs: anodised, painted in the various RAL colours, marbled colours, wood effect.‎ The glass is available in the following variants: transparent, extra-clear, coloured, smoked, bronzed, acid-etched and even screen-printed with customised decoration.‎ MAINTENANCE The materials of which the glazing is made, aluminium, toughened glass and stainless steel accessories, due to their intrinsic characteristics do not require maintenance.‎ It is only necessary to carry out adequate cleaning from time to time.‎