HOPPE eHANDLE HANDSFREE Exterior door handle with non-contact opening

The eHandle HandsFree for doors allows you to unlock your front door even with your hands full – just by moving your foot through a spotlight on the ground.‎ Anyone who is authorised to open the door is automatically recognised by the encrypted signal of a transponder when approaching the door.‎ The advantages Contactless unlocking Extremely convenient access Highly secure Energy-saving transponder Universal connection to motor lock HOPPE brand quality Contactless unlocking When someone who is authorised to open the door approaches, a spotlight appears on the ground below the pull handle.‎ Then all they need to do is move their foot or even an umbrella or similar object through the spotlight and the motor lock unlocks the door, enabling access.‎ Convenient access Enter with maximum ease: it is simple and convenient to bring awkward items, lots of shopping bags or even little children in your arms into the house, without needing to put anything down.‎ Secure and reliable technology The communication between the transponder and control unit uses state-of-the-art AES encryption.‎ The use of multiple communication between the transponder and control unit provides much greater security than a conventional key.‎ The eHandle HandsFree for doors can tell which side of the door the transponder signal is coming from – ruling out accidental door release from inside.‎ The detection radius for the wireless signal is just one metre, which provides additional protection for the communication.‎ The transponder is automatically switched off  after 30 seconds in rest position, which means that it stops sending signals and also stops using energy during this time.‎ The choice of different light colours ensures that the spotlight can be seen well on different surfaces in front of the door.‎ Technical Data Operating temperature: -20 °C to +60 °C Wireless frequencies: 125 kHz / 868 MHz Encryption: AES (Advanced Encryption Standard) Detection range of the transponder: approx.‎ 1 m Operating voltage: 8-24V DC Current-carrying capacity of switch contact: 24V DC, 1,5 A (max.‎) Transmission power: 6,3 mW Maximum power consumption: 0,7 W Protection class: IP 44 Electrical connection: universal application (optionally positive or negative control pulse for motor lock) Transponder: 2 pieces, with battery (type CR 2450) Cards: 1 administration card, 1 configuration card, 2 entry cards, 2 entry shadow cards, 2 transponder shadow cards.‎ Further info from manufacturer on eHANDLE HANDSFREE HOPPE