LAB23 STRATES WOOD Multi-layer wood Bench

The structure of the bench STRATES WOOD is made of multi-layered exotic wood panels.‎ The 2 elements are connected to each other through 4 M20 stay-rods, provided with 4 spacers resulting from tubular elements 20x2 mm in stainless steel AISI 316.‎ The bench is made with 34 exotic wood slats 100x80x910 mm, fixed to the load-bearing, laser-cut elements in steel of 10/10 thickness.‎ The slats are fixed with M10 screws, and the laser-cut cover in galvanized steel of 20/10 thickness, is fixed with M5 screws on 12 C shaped steel structures, 50x30x3 mm.‎ The two parts in contact with the ground are covered with an element in galvanized steel bent like a C 80x100x80 mm and 30/10 thick.‎ For the realization of this product, Steel EN10111DD11 is used and later treated with a cycle of sandblasting, cataphoresis and powder coating.‎ Such cycle is meant to guarantee the protection of the painted products, in an environment of C4 corrosion class, as requested by the UNI regulations EN ISO 12944-2.‎ The products are eventually polyester-powder coated with RAL colours at choice.‎ The galvanized steel used is steel EN10346DX51D+Z and, unless otherwise stated, is not painted.‎ The wood used is either Iroko or Okume, treated with natural, water-repellent, UV ray resistant oils.‎ Further info from manufacturer on STRATES WOOD LAB23